Претраживање
Приказ резултата 21-30 од 74
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
Techno-economic analysis of unsaturated polyester production from waste PET / Tehno-ekonomska analiza proizvodnje nezasićenih poliestara iz otpadnog PET-a
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Unsaturated polyester resins (UPe) were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate (PET) depolymerization with dipropylene glycol (DPG) in the presence of tetrabutyl ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
Indentation behaviour of 'soft film on hard substrate' composite system type / Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- ...
Microstructural properties and cavitation behavior of hypereutectic Al-Si alloy obtained by rheocasting process / Mikrostrukturna svojstva i kavitaciono ponašanje nadeutektičke Al-Si legure dobijene reokasting postupkom
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The purpose of this study was to investigate possible application of AlSi alloy produced by rheocasting process in cavitation conditions. A rheocasting process was used to refine the as cast microstructure and improve the ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...
Studying of physicochemical properties of newly synthesized uracil derivatives / Proučavanje fizičko-hemijskih svojstava novosintetisanih derivata uracila
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Uracil derivatives are potentially biologically active compounds, so the investigation of their physical and chemical properties is very important for their further application. In this work a series of newly synthesized ...