Search
Now showing items 11-20 of 855
Preparation and modification of itaconic anhydride-methyl methacrylate copolymers / Sinteza i modifikacija kopolimera anhidrida itakonske kiseline i metil-metakrilata
(Serbian Chemical Society, Belgrade, 2007)
The free radical copolymerisation of itaconic anhydride and methyl methacrylate in solution was studied at 60 °C. The copolymer composition was determined by 1H-NMR spectroscopy and the obtained monomer reactivity ratios ...
Removal of organochlorine pesticides from water using virgin and regenerated granular activated carbon / Uklanjanje pesticida iz vode na granulisanom aktivnom uglju
(Serbian Chemical Society, Belgrade, 2010)
Public water systems use granular activated carbon in order to eliminate pesticides. After saturation, the used activated carbon is regenerated and reused in order to reduce the costs of water production and minimize waste. ...
Simplification of the synthesis of the reversible addition-fragmentation chain transfer agent 2-(2-cyanopropyl)-dithiobenzoate / Pojednostavljenje postupka sinteze raft agensa 2-(2-cijanopropil)-ditiobenzoata
(Serbian Chemical Society, Belgrade, 2010)
The general literature procedure for the preparation of the reversible addition-fragmentation chain transfer (RAFT) agent 2-(2-cyanopropyl)-dithiobenzoate (CPDB) was modified by omitting the recrystallisation of the ...
Deformation mechanisms in ti3al-nb alloy at elevated temperatures
(Institute of Metals and Technology, 2010)
Ti3Al-11Nb-1V (x/%) was made in a vacuum arc furnace. Hot-rolling was conducted at 1050 degrees C in a two-phase field of the alloy. Strain-rate jump tests were performed at T = 800-1100 degrees C and strain rates of 10(-6) ...
Modeling of strength degradation during water quench test of low cement high alumina castable
(University of Chemistry and Technology, Prague, 2010)
Low cement high alumina castable was synthesized, cured, and then sintered at 1100 degrees C for 3 hours. Water quench test was used as an experimental method for thermal stability testing. Image analysis program was applied ...
Influence of current and temperature on discharge characteristics of electrochemical nickel-cadmium system / Uticaj struje i temperature na karakteristike pražnjenja elektrohemijskog nikal-kadmijum sistema
(Association of Chemical Engineers of Serbia, 2010)
The paper elaborates determination of characteristic values in the discharging process of non-hermetic nickel-cadmium galvanic battery with nominal voltage Un = 60 V and nominal capacity qn = C5 = 190 A h and its dependence ...
Synthesis, structure and solvatochromic properties of 3-cyano-4,6-diphenyl-5-(3- and 4-substituted phenylazo)-2-pyridones / Sinteza, struktura i solvatohromna svojstva 3-cijano-4,6-difenil-5-(3- i 4-supstituisanih fenilazo)-2-piridona
(Serbian Chemical Society, Belgrade, 2010)
A series of some new pyridone arylazo dyes was synthesized from the corresponding diazonium salts and 3-cyano-4,6-diphenyl-2-pyridone using the classical reaction for the synthesis of the azo compounds. The structures of ...
An Efficient Electrochemical Sensing of Caffeic Acid at Thermolysis Prepared Urea-formaldehyde Resin Modified with Fe(III) and Ti(IV) Oxide Particles
(Electrochemical Science Group, 2022)
Urea-formaldehyde resin (UF) is primarily used as an adhesive applied in the wood composites industry. In this work, we found that this resin modified with metal compounds could be a good starting point to produce ...
Antimicrobial activity of hybrid hydrogels based on poly(vinylpyrrolidone) containing silver / Antimikrobna aktivnost hibridnih hidrogelova na bazi poli(vinilpirolidona) koji sadrže srebro
(Association of Chemical Engineers of Serbia, 2010)
New hybrid hydrogels were prepared by radical copolymerization of 2-hydroxyethyl methacrylate, itaconic acid, poly(vinylpyrrolidone) and silver salt. FTIR spectroscopy has confirmed binding of silver particles in hydrogels. ...
Radon and thoron exhalation rate measurements from building materials used in Serbia
(Nukleonika, 2020)
The second most important source of indoor radon, after soil beneath dwelling, is building material. With the increase in environmental awareness and new energy-saving policies, residents tend to replace the existing windows ...