Претраживање
Приказ резултата 11-20 од 26
The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces
(Soc Brasileira Quimica, Sao Paulo, 2005)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin ...
Electrochemical properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Elektrohemijske karakteristike i termička stabilnost epoksidnih kataforetskih prevlaka na aluminijumu i modifikovanim površinama aluminijuma
(Serbian Chemical Society, Belgrade, 2001)
The corrosion behavior of epoxy coatings electrodeposited on aluminum, as well as on electrochemically and chemically modified aluminum were investigated during exposure to 3 % NaCl. Electrochemical impedance spectroscopy ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production / Elektrohemijsko taloženje i karakterizacija Fe-Mo legura kao katoda za reakciju izdvajanja vodonika u industrijskom procesu proizvodnje hlorata
(Serbian Chemical Society, Belgrade, 2005)
Fe–Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Electrochemical deposition and characterization of Zn-Fe alloys / Elektrohemijsko taloženje i karakterizacija Zn-Fe legura
(Serbian Chemical Society, Belgrade, 2004)
Zn–Fe alloy electrochemically deposited on steel under various deposition conditions were investigated using anodic linear sweep voltammetry (ALSV) and X-ray diffraction (XRD) analysis for phase structure determination, ...