Pretraživanje
Prikaz rezultata 1-10 od 235
Removal of ethylene oxide from waste gases by absorption / Uklanjanje etilen-oksida iz otpadnih gasova postupkom apsorpcije
(Association of Chemical Engineers of Serbia, 2011)
Ethylene oxide (EtO) is an organic compound, which is used as a starting material in the production of polymers and as sterilizing agent for thermolabile materials. Although ethylene oxide is not common as an organic ...
Numerical analysis of constraint effect on ductile tearing in strength mismatched welded cct specimens using micromechanical approach
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
In this paper, constraint effect on ductile fracture initiation and propagation has been studied. Three-dimensional finite element analyses of mismatched welded joints made of high strength steel, have been performed for ...
Simple and cost-effective measures for the improvement of paper mill effluent treatment - A case study
(Journal of Cleaner Production, 2011)
In this study, the performance and the efficiency of physico-chemical effluent treatment in a paper mill was investigated, with the aim of evaluating the treatment rationality and running stability. The effluent treatment ...
Effect of alkaline solutions on the tensile properties of glass-polyester pipes / Uticaj baznih rastvora na zatezne karakteristike staklo-poliester kompozitnih cevi
(Faculty of Technology, Novi Sad, 2011)
Construction materials, traditionally used in process equipment, are today successfully replaced by composite materials. Hence, many pipes are made of these materials. The subject of this study was the influence of liquids ...
The effect of boron incorporation on the structure and properties of glassy carbon
(Elsevier Ltd., 2011)
Boron was introduced into glassy carbon by chemical modification and by irradiating the precursor polymer with boron ions. Using chemical modification, a polymer with uniform distribution of boron in the bulk was obtained, ...
The evolution of hydrogen from proton irradiated glassy carbon
(Elsevier B.V., 2011)
Glassy carbon was irradiated with 15 key H(+) ion beam. It was observed that the implanted hydrogen is unstable in material and evolves as H, H(2) and H(2)O. Post-irradiation evolution of H, H(2) and H(2)O from proton ...
Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's ...
Preparation and characterization of pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid
(Wiley-Blackwell, Hoboken, 2011)
Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were prepared in two steps. Chitosan was first ionically crosslinked with itaconic acid, after which a free radical polymerization and ...
Bucket wheel excavator Integrity assessment of the bucket wheel boom tie-rod welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The bucket wheel boom tie-rods are vital structural parts of the bucket wheel excavators (BWE) Their failures inevitably cause BWE collapse and are followed among other things by a substantial financial loss (millions of ...
Comparative analysis of oxidative synthesis of N-alkyl, N,N-dialkyl and N-cykloalkyl-O-isobutyl thioncarbamate / Uporedna analiza oksidativnih postupaka sinteze N-alkil, N,N-dialkil i N-cikloalkil-O-izobutil tionkarbamata
(Association of Chemical Engineers of Serbia, 2011)
An optimized synthesis of N-alkyl, N,N-dialkyl- and N-cycloalkyl-O-isobutyl thioncarbamates by aminolysis of sodium isobutylxanthogenic acid (NaiBXAc) and primary, secondary and cycloalkyl amines was developed at laboratory ...