Претраживање
Приказ резултата 1-10 од 28
Mechanochemically assisted solid-state and citric acid complex syntheses of Cu-doped sodium cobaltite ceramicsh
(Elsevier Science Sa, Lausanne, 2015)
In the last decade, the sodium cobaltite ceramic became a promising candidate for potential thermoelectric applications, because of its large thermopower and low resistivity. In this work, polycrystalline samples of ...
Efficient arsenic removal by cross-linked macroporous polymer impregnated with hydrous iron oxide: Material performance
(Elsevier Science Sa, Lausanne, 2015)
Optimization of the synthesis of cross-linked macroporous polymer impregnated with hydrous iron oxide and post-process of obtained material by application of freeze/drying technique, produces high performance adsorbent ...
Impact of sodium sulfate solution on mechanical properties and structure of fly ash based geopolymers
(Springer, Dordrecht, 2015)
In this paper, geopolymers based on two different fly ash samples were exposed to sodium sulfate (Na2SO4) solution (50 g/l) over a period of 365 days. It was found that sulfate solution attack caused a small decrease in ...
Nanomaterial with High Antimicrobial Efficacy-Copper/Polyaniline Nanocomposite
(Amer Chemical Soc, Washington, 2015)
This study explores different mechanisms of antimicrobial action by designing hybrid nanomaterials that provide a new approach in the fight against resistant microbes. Here, we present a cheap copper-polyaniline (Cu-PANI) ...
Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
(Elsevier Sci Ltd, Oxford, 2015)
Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 ...
The effect of different extractants on lead desorption from a natural mineral
(Elsevier, Amsterdam, 2015)
Natural minerals, such as quartz, clinoptilolite and calcite, are useful as sorbents for various applications, but their content of heavy metals ions is the most problematic obstacle to their application. Before their ...
Optimization of extraction of stinging nettle leaf phenolic compounds using response surface methodology
(Elsevier, Amsterdam, 2015)
A full three level factorial design was implemented for optimization of extraction parameters in order to maximize total phenolic (TP) yield from stinging nettle leaf. Factors considered were percentage of methanol in ...
Bond strength of restorative materials to hydroxyapatite inserts and dimensional changes of insert-containing restorations during polymerization
(Elsevier Sci Ltd, Oxford, 2015)
Objective. To determine the shear bond strength (SBS) between synthetic controlled porous hydroxyapatite (HAP) inserts and restorative materials and dimensional changes of insert-containing restorations during curing. ...
Optimisation of microwave-assisted extraction parameters for antioxidants from waste Achillea millefolium dust
(Elsevier Science Bv, Amsterdam, 2015)
Microwave-assisted extraction of polyphenols and flavonoids from waste Achillea millefolium (yarrow) dust was optimised using the response surface methodology. The influence of the extraction time (13-47 s), ethanol ...
Novel and conventional working fluid mixtures for solar Rankine cycles: Performance assessment and multi-criteria selection
(Pergamon-Elsevier Science Ltd, Oxford, 2015)
This work investigates the performance of working fluid mixtures for use in solar ORC (Organic Rankine Cycle systems) with heat storage employing FPC (Flat Plate Collectors). Several mixtures are considered including ...