Претраживање
Приказ резултата 1-8 од 8
Authors' response to comments on "Factors influencing the removal of divalent cations by hydroxyapatite" Discussion
(Elsevier, Amsterdam, 2009)
Recently. it has come to our attention, that a polemical note by Milonjic [S.K. Milonjic, Comments on "factors influencing the removal of divalent cations by hydroxyapatite", J. Hazard. Mater. 162 (2009) 1588-1589]. has ...
Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production (vol 70, pg 879, 2005)
(Srpsko hemijsko društvo, Beograd, 2005)
Electron ionization tandem mass spectra of some 3-cyano-4-substituted phenyl-6-phenyl-2(1H)-pyridones
(John Wiley & Sons Ltd, Chichester, 2006)
The critical apparent density for the free flow of copper powder / Kritična nasipna masa za tečenje praha bakra
(Serbian Chemical Society, 2003)
A method for the determination of the critical apparent density, which permits the free flow of electrodeposited copper powder is discussed. It was found that powders the apparent density of which were larger than 2.3 g/cm3 ...
Erratum: Effect of temperature on the excess molar volumes of some alcohol + aromatic mixtures and modelling by cubic EOS mixing rules (Fluid Phase Equilibria (2006) 239 (69-82) DOI: 10.1016/j.fluid.2005.10.022)
(Elsevier, 2006)
In Table 2 of the original paper, several typographical errors have occurred in the density and excess molar volume values. In the table below the correct values of ρ and VE are given. It should be mentioned that all ...
Physical modeling of representative particles of electrodeposited copper powders / Fizičko modelovanje reprezentativnih čestica elektrohemijski istaloženog bakarnog praha
(Serbian Chemical Society, 2006)
A method for the estimation of the size of the representative particle of a copper powder is given. Cross sections of representative particles of flowing and non-flowing powders estimated by this procedure are also presented.
An estimation of the interfacial energy of the copper-copper sulphate solution interface and of the specific surface of copper powder / Procena međupovršinske energije bakar-rastvor bakar sulfata i specifične površine bakarnog praha
(Serbian Chemical Society, 2002)
Apossible way for the estimation of the interfacial energy of the copper – copper sulphate solution interface is proposed. The estimated value of (2.7±0.3) J cm-2 and the derived equations which relate the specific surface ...
The STM analysis of a silver mirror surface / STM analiza površine srebrnog ogledala
(Serbian Chemical Society, 2001)
In this work, the structure of a silver mirror surface was examined by the STM technique. It was shown that the structural characteristics which enable a high degree of mirror reflection from this surface, which is very ...