Претраживање
Приказ резултата 11-20 од 3536
The thermal stability of some poly(di-aryl itaconates)
(Springer, New York, 1991)
The non-oxidative thermal stability of poly(di-aryl itaconates) was established by thermogravimetric analysis. The polymers investigated were poly(diphenyl itaconate) (PDPhI), poly(di-ortho-, meta- and para-tolyl itaconates) ...
The non-oxidative thermal degradation of poly (Di-2-chloroethyl itaconate)
(John Wiley & Sons Ltd, W Sussex, 1993)
The non-oxidative thermal degradation of poly (di-2-chloroethyl itaconate) (PD2CEI) was studied by TG and by analysing the thermal products. The major processes occurring during thermal analysis are crosslinking, ...
Nonlinear frequency response of adsorption systems: isothermal batch and continuous flow adsorbers
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
The problem of nonlinear frequency response of adsorption systems is treated using the concept of higher-order frequency response functions (FRFs). The FRFs on the adsorber and on the particle scale are considered. Based ...
Frequency response of an adsorber with modulation of the inlet molar flow-rate - I. A semi-batch adsorber
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
A new method of frequency response analysis of an adsorber, with modulation of the adsorbate molar supply instead of traditional modulation of the reservoir volume, is presented. A semi-batch mode of operation is considered, ...
Frequency response of an adsorber with modulation of the inlet molar flow-rate - II. A continuous flow adsorber
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
A new method of frequency response analysis of an adsorber, with modulation of the adsorbate molar supply instead of traditional modulation of the reservoir volume, is presented. A continuous mode of operation is considered, ...
Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites
(Wiley, Hoboken, 2002)
The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly-L-lactide and collagen) matrix composite was investigated through finite-element ...
Immobilization of lipase from Candida rugosa on a polymer support
(Springer, New York, 1998)
Lipase from Candida rugosa was immobilized by adsorption onto a macroporous copolymer support. Under optimum conditions the maximum amount of protein bound was 15.4 mg/g and the immobilization efficiency was 62%. The ...
Electrochemically deposited thin films of amorphous Fe-P alloy Part I. Chemical composition and phase structure characterization
(Elsevier Science Sa, Lausanne, 1998)
Thin Fe-P alloy films (0.5 to 25.0 mu m thick) were electrodeposited from sulfate solutions. The influences of various deposition conditions (current density, time, pH and temperature) on the composition and structure of ...
Osmotic and activity coefficients of {yK(2)SO(4)+(1-y)Mg(NO3)(2)}(aq) at the temperature T = 298.15 K
(Academic Press Ltd, London, 1998)
'The osmotic coefficients of the mixed electrolyte solution {yK(2)SO(4) + (1 - y)Mg(NO3)(2)}(aq) have been measured by the isopiestic method, at the temperature T = 298.15 K. The activity coefficients of K2SO4 and Mg(NO3)(2) ...
Characterization of alumina films electrodeposited on steel from water suspensions
(InterCeram: International Ceramic Review, 2003)
Alumina films were electrodeposited on steel from water suspensions using the constant voltage method. The morphology of deposited films was investigated using optical microscopy coupled with image analysis which enabled ...