Pretraživanje
Prikaz rezultata 11-20 od 20
Particle velocities in quasi two-dimensional water fluidized beds of spherical particles
(Elsevier, Amsterdam, 2013)
Particle velocities have been measured in two-dimensional water fluidized beds of mono-sized spherical glass particles d(p) = 1.94, 2.98, 4.00 and 6.00 mm in diameter. For each particle size, a separate column was constructed ...
Solid circulation rate and particle collisions in quasi two-dimensional water fluidized beds of spherical particles
(Elsevier Science Bv, Amsterdam, 2014)
The equations for the overall particle circulation rate and the frequency of particle-particle collisions in the quasi two-dimenional water-fluidized bed were proposed. The equations were based on the experimental results ...
Optimal pixel resolution for sand particles size and shape analysis
(Elsevier, Amsterdam, 2016)
In this paper, the influence of different scanning resolutions and the use of image analysis softwares for the image analysis, SigmaScan Pro, Image) and Matlab, on size and shape factors commonly used in particles ...
Particle characterization of polydisperse quartz filtration sand
(Elsevier Science Bv, Amsterdam, 2014)
In this paper, different methods for particle characterization were applied to 16 polydisperse fractions of quartz filtration sand obtained by sieving, with sieve diameters in the interval d(m) = 0359 to 2.415. For each ...
Analogy between momentum and heat transfer in liquid-solid fluidized beds
(Elsevier Science Bv, Amsterdam, 2015)
Wall-to-bed heat transfer in particulate fluidized beds of spherical particles was studied. Experiments were performed using spherical glass particles of 0.80-2.98 mm in diameter with water in a 25.4 mm I.D. copper tube ...
Mass transfer and concentration boundary layer in a particulate fluidized bed
(Elsevier Science Bv, Amsterdam, 2016)
The aim of this study was to analyze the concentration boundary layer for a comprehensive description of the mass transfer in systems with fluidized particles. Mass transfer from the wall of the column to the fluid in the ...
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method
(Powder Technology, 2013)
In this study, nanocrystalline LiFePO4/C composite powder has been synthesized via a cellulose matrix-assisted method. In an experiment conducted under extreme conditions involving rapid heating, short high-temperature ...
Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen
(Elsevier Science Sa, Lausanne, 2008)
Copper powder particles formed by electrolysis under different quantities of evolved hydrogen were analyzed using the scanning electron microscopy (SEM) technique. It was found that the structure of the powder particles ...