Pretraživanje
Prikaz rezultata 11-20 od 102
Sinteza i karakterizacija polimernih hidrogelova na bazi akrilata za uklanjanje teških metala iz vodenih rastvora
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In the first part of this work hydrogels based on 2-hydroxyethyl acrylate and itaconic acid P(HEA/IA) were prepared by free radical cross-linking copolymerization. In order to investigate the influence of the hydrogel ...
Production of lactic acid and probiotic biomass on distillery stillage / Proizvodnja mlečne kiseline i probiotske biomase na destilerijskoj džibri
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Lactic acid is a significant chemical for food, cosmetic, pharmaceutical and chemical industry. Currently, Serbia imports lactic acid and utilization of distillery stillage, a waste water from bioethanol production, as a ...
Surface modification of cellulose fibers using dielectric barrier discharge / Modifikovanje površine celuloznih vlakana primenom dielektričnog barijernog pražnjenja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the theoretical part of doctoral dissertation, the most significant literature data concerning cellulose structure and properties have been systematically reviewed. Special attention has been given to the possibilities ...
Production and characterization of nanocomposite hydrogels based on alginate and silver nanoparticles for biomedical applications / Dobijanje i karakterisanje nanokompozitnih hidrogelova na bazi alginata i nanočestica srebra za primenu u biomedicini
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Development of novel nanocomposite biomaterials for biomedical applications requires comprehensive evaluation and characterization of biomaterials such as determination of the chemical composition, physical properties, ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Obtaining of nanostructured powders for production of new dispersion strengthened sintered material in the system Cu-Al2O3 / Dobijanje nanostrukturnih prahova u cilju proizvodnje novih disperzno ojačanih sinterovanih materijala u sistemu Cu-Al2O3
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2009)
This PhD thesis presents the possibility of nanostructured composite materials based on copper and alumina synthesis trough a new method, which is a combination of thermo-chemical synthesis and mechanical alloying. ...
Synthesis and characterization of hydrogels based on 2-hydroxyethyl acrylate and itaconic acid for controlled release of therapeutically active metal ions аpplication. / Sinteza i karakterizacija hidrogelova na bazi 2-hidroksietil akrilata i itakonske kiseline za primenu u kontrolisanom otpuštanju terapeutski aktivnih jona metala
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation, the novel polymeric materials were synthesized as carriers for the incorporation and controlled release of therapeutically active metal ions, for the application in wound treatment and soft ...
Extraction from curry plant (Helichrysum italicum) and impregnation of solid carries with the extract using supercritical carbon dioxide / Ekstrakcija iz smilja (Helichrysum italicum) i impregnacija čvrstih nosača ekstraktom primenom natkritičnog ugljenik(IV)-oksida
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Curry plant (Helichrysum italicum (Roth) G. Don fil., Asteraceae) is Mediterranean plant, known for its traditional use in treatment of inflammatory processes mostly on skin and in the digestive system. This plant presents ...
Synthesis and characterization of materials obtained by modification of natural zeolite (clinoptilolite) and phosphate based microporous materials with zeolitic structure / Sinteza i karakterizacija materijala nastalih modifikacijom zeolita (klinoptilolita) i mikroporoznih fosfata sa strukturom zeolita
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the first part of the dissertation, the possibility of modifying the zeolitic tuff from the mine Zlatokop (near Vranjska Banja) was investigated in order to obtain new adsorbents. The second part presents the possibility ...
Local approach to ductile fracture of low steel welded joints / Lokalni pristup žilavom lomu zavarenih spojeva niskolegiranog čelika
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The subject of this dissertation is analysis of ductile fracture initiation and stable crack growth by ductile fracture mechanism in low alloyed steel and welded joints. The analysis is conducted using local approach to ...