Pretraživanje
Prikaz rezultata 31-40 od 40
Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites
(MDPI, Basel, 2020)
This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al(2)O(3)system with 1-2.5 wt.% of alumina and their characterization, which included: transmission electron microscopy: focused ion ...
Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
(MDPI, Basel, 2018)
This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, ...
Characterization of nano-powder morphology obtained by ultrasonic spray pyrolysis
(Savez inženjera metalurgije Srbije, Beograd, 2008)
Spherical nanosized particles of copper were synthesized by ultrasonic dispersion of solutions from copper sulphate in the temperature range of 800-900°C in hydrogen atmosphere. A controlled particle size was realized ...
Metal-loaded zeolite remediation of soils contaminated with pandrug-resistant Acinetobacter baumannii
(Inst Medical Research & Occupational Health, Zagreb, 2020)
Due to the development of resistance to antimicrobial agents, bacterium Acinetobacter baumannii is nowadays a leading cause of nosocomial outbreaks. Clinically relevant A. baumannii outside hospital settings including ...
Easy, Flexible and Standardizable Anti-Nascent Biofilm Activity Assay to Assess Implant Materials
(MDPI, 2023)
Medical implants have improved the quality of life of many patients. However, surgical intervention may eventually lead to implant microbial contamination. The aims of this research were to develop an easy, robust, ...
Influence of milling parameters on the preparation of fine tungsten and copper powders by mechanically induced self-propagating reaction / Uticaj parametara mlevenja na dobijanje finih prahova volframa i bakra mehanički iniciranom samorasprostirućom reakcijom
(Savez inženjera metalurgije Srbije, Beograd, 2004)
Mechanically induced self-propagating reaction in planetary ball mill was realized in three different systems, CaWO4 (scheelite) + Mg, CuO + Ti and CuO + Zr. An influence of a ball diameter (from 5 to 41.2 mm) at three ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum
(Belgrade : Association of the Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
Determination of AL2O3particle size in Cu-AL2O3 nanocomposite materials using UV spectrophotometry / Određivanje veličine čestica AL2O3 u nanokompozitnim materijalima iz sistema Cu-AL2O3 primenom UV spektrofotometrije
(Savez inženjera metalurgije Srbije, Beograd, 2008)
In order to achieve improved mechanical properties of dispersion strengthened nanocomposite, without influencing electrical and thermal conductivity it is necessary for dispersoide to be nano sized and uniformly distributed ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(Metals, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...