Pretraživanje
Prikaz rezultata 21-30 od 40
Alkali-lead deposits of lead refinery 'Trepča' and their influence on Ibar's waters / Alkalno-olovne deponije rafinerije olova 'Trepča' i njihov uticaj na vode Ibra
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2009)
Besides lead as basic metal, flotation lead concentrates contain several accompanied metals, such as: copper, zinc, iron, antimony, silver, gold, bismuth and arsenic. Raw lead and slag are obtained by agglomeration roasting ...
Influence of Electrolyte Impurities from E-Waste Electrorefining on Copper Extraction Recovery
(Metals, 2021)
In order to reflect possible issues in future sole e-waste processing, an electrolyte of complex chemical composition reflecting system of sole e-waste processing was obtained by following a specially designed pyro-elect ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Sintering of Cu-Al2O3 nano-composite powders produced by a thermochemical route / Sinterovanje nano-kompozitnih prahova Cu-Al2O3 dobijenih termohemijskih postupkom
(Serbian Chemical Society, Belgrade, 2007)
This paper presents the synthesis of nano-composite Cu-Al2O3 powder by a thermochemical method and sintering, with a comparative analysis of the mechanical and electrical properties of the obtained solid samples. ...
Overpotential controls the morphology of electrolytically produced copper dendritic forms / Пренапетост контролише морфологију електролитички произведених дендритичних форми бакра
(Belgrade : Serbian Chemical Society, 2019)
The morphologies of copper dendritic forms obtained in both potentiostatic and galvanostatic regimes of electrolysis with various amounts of the electricity were analyzed by the scanning electron microscopy (SEM) technique. ...
Synthesis and sintering of Cu-Al2O3 nanocomposite powders produced by a thermochemical route
(Savez inženjera metalurgije Srbije, Beograd, 2007)
By hydrometallurgy and powder metallurgy along with prognosis of physical-chemical properties, a synthesis of new improved materials can be successfully performed with in advance pre-set properties which is conditioned by ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Analysis of the properties of a Cu-Al2-O3 sintered system based on ultra fine and nanocomposite powders
(International Institute for the Science of Sintering, Beograd, 2007)
In this paper synthesis of a composite based on Cu-Al2O3 by a thermo-chemical method is shown along with a comparative analysis of the properties of the obtained nanocomposite sintered samples, which are characterized by ...
Copper Separation from Aqueous Effluents by Liquid Membrane Pertraction
(International Ecological Congress, Voronezh, Russia, September 22-28, 1996)
In this paper the feasibility of applying liquid membrane pertraction to the copper
recovery from aqueous effluents has been examined. A continuos laboratory-scale
hollow fiber-in-fiber type membrane pertractor was ...