Претраживање
Приказ резултата 41-50 од 713
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Arsenic Removal from Water Using Industrial By-Products
(Hindawi Limited, 2013)
In this study, removal of arsenic ions using two industrial by-products as adsorbents is represented. Removal of As(III) and As(V) from water was carried out with industrial by-products: residual from the groundwater ...
A novel platinum-based nanocatalyst at a niobia-doped titania support for the hydrogen oxidation reaction
(Journal of the Serbian Chemical Society, 2011)
The kinetics of the hydrogen oxidation reaction (HOR) was studied at Pt nanoparticles supported on niobia-doped titania (Pt/N-T). The catalyst support, with the composition of 0.05NbO(2.5-delta)-0.995TiO(2) (0 LT delta LT ...
Improvement of production performance of functional fermented whey-based beverage / Unapređenje performansi proizvodnje funkcionalnog fermentisanog napitka na bazi surutke
(Association of the Chemical Engineers of Serbia, 2014)
The aim of this study was improvement of the performances for the production of whey-based beverages with highly productive strains of Lactobacillus. Individual or mixed cultures containing Lactobacillus helveticus ATCC ...
Tailoring the supercapacitive performances of noble metal oxides, porous carbons and their composites / Rasvetljavanje superkondenzatorskih odlika oksida plemenitih metala, poroznih ugljeničnih materijala i njihovih kompozita
(Serbian Chemical Society, 2013)
Porous electrochemical supercapacitive materials, as an important type of new-generation energy storage devices, require detailed analysis and knowledge of their capacitive performances under different charging/discharging ...
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...
A LFER Kinetic Study of The Reaction of 5-Substituted Orotic Acids with Diazodiphenylmethane
(Wiley, Hoboken, 2016)
Linear free energy relationships (LFER) were applied to the kinetic data for the reaction of 5-substituted orotic acids, series 1, with diazodiphenylmethane (DDM) in N,N-dimethylformamide and compared with results obtained ...
The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating
(Walter de Gruyter Gmbh, Berlin, 2019)
In this paper, structural and mechanical properties of APS - atmospheric plasma spray coating Al-12Si are presented. The aim of the research was the optimisation of the flow of powder to produce layers with optimal mechanical ...
Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by powder metallurgy techniques
(Walter de Gruyter GmbH, 2015)
The Cu-7vol.%ZrB2 alloy examined in this study was consolidated via powder metallurgy (PM) processing by combining mechanical alloying and hot pressing. Powder mixture with composition: 94.78 wt.% copper, 4.1 wt.% zirconium, ...
Processing and properties of pure antiferromagnetic h-YMnO3
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2019)
Yttrium manganite (YMnO3) is widely investigated multiferroic material with potential use in many technological applications. In this paper, we report on the preparation and characterization of multiferroic hexagonal YMnO3 ...