Pretraživanje
Prikaz rezultata 141-149 od 149
Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Organoclay-polymer nanocomposites / Organoglina-polimerni nanokompoziti
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The properties of polymer nanocomposites exceed the properties of common composite materials due to the nanoscale size and morphology of the fillers used. Particulate fillersare commonly used in polymers forimproved ...
Influence of working conditions on strength calculation of pressure vessel of austenitic steel according to SRPS EN 13445 / Uticaj radnih uslova na proračun čvrstoće posude pod pritiskom od austenitnog čelika prema SRPS EN 13445
(Society for Structural Integrity and Life, Institute for Material Testing, 2013)
Upon the adoption of regulations for pressure equipment the series of standards SRPS EN 13445 began to apply. The paper illustrates strength calculation of a vertical cylindrical pressure vessel of austenitic steels according ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...
Effect of the pH of artificial saliva on ion release from commercially pure titanium / Uticaj pH vrednosti veštačke pljuvačke na otpuštanje jona iz komercijalno čistog titana
(Faculty of Technology, Novi Sad, 2013)
Due to their excellent characteristics, such as chemical inertness, mechanical resistance, low Young's modulus, high corrosion resistance, and outstanding biocompatibility, titanium and its alloys are the most used metallic ...
Exergy concept and its implementation in the recycling of metals / Eksergijski koncept i njegova primena u recikliranju metala
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Modern industrial product design implies presence of many different materials. Consequently, in the recycling process, shredding and separation procedures are applied. However, all materials cannot be completely separated; ...
Complex sulphide-barite ore leaching in ferric chloride solution
(Association of Metallurgical Engineers of Serbia, 2016)
The results of research on the leaching process of complex sulphide-barite ore were presented in this paper. The leaching process was carried out in a laboratory autoclave by ferric chloride solution. Considering that those ...
Selection of lactic acid bacteria strain for simultaneous production of α- and β-galactosidases / Izbor mlečnokiselinske bakterije za istovremenu proizvodnju α- i β-galaktozidaza
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Galactosidases are group of enzymes gaining increasing attention in recent times due to the fact they catalyse hydrolysis of galatose-containing oligosaccharide, which reduce digestibility of various food and feed products. ...