Претраживање
Приказ резултата 11-20 од 180
Optimization of Active Carbonaceous Material Obtained by Low Hydrothermal Carbonization of Plane Tree Seed with H3PO4
(Trans Tech Publications Ltd, Durnten-Zurich, 2017)
Activated carbons (ACs) were successfully prepared using plane tree seed (PTS) as a cheap and renewable raw material. The plane tree seeds were firstly treated combining magnetic (MM) and ultrasonic mixing (USM) during ...
Dynamic mechanical properties of nanocomposites with poly (vinyl butyral) matrix
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
This work reports the preparation of SiO(2) and TiO(2)/poly (vinyl butyral) nanocomposites with enhanced dynamic mechanical properties. Silica and titania nanoparticles were introduced in the matrix as the neat powder and ...
Optimization of integrated steel plant recycling: Fine-grain remains and by-products synergy
(Strojarstvo, 2011)
The recycling capabilities of the integrated steel plant (capacity 2 million tons/year), have been evaluated annually. The quantities of dusts, scales and sludge generated at the Steel Plant located in Smederevo, Serbia, ...
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
Carbon Monolith Surface Chemistry Influence on the Silver Deposit Amount and Crystallite Size
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
The surface of carbon monolith (CM) was chemically treated in order to obtain antibacterial filters with silver deposit for water treatment. The chemical treatment involved submerging the as-received CM in HNO(3), KOH and ...
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Measuring the performance of quality assurance processes: pharmaceutical industry deviation management case study
(Springer, New York, 2010)
This article presents experience from the practice of a successful pharmaceutical company related to design and implementation of performance measures (PMs) for deviation management linked to the analysis of impact on the ...
Microstructural investigations of the simulated heat affected zone of the creep resistant steel P91
(Taylor & Francis Ltd, Abingdon, 2010)
The microstructural changes in the heat affected zone (HAZ) of 9% chromium ferritic steel for manufacturing fossil fired power plant components are investigated. The heat treatment region of 925 degrees C in HAZ was tested ...
Nondestructive testing of thermal shock resistance of cordierite/silicon carbide composite materials after cyclic thermal shock
(Taylor & Francis Inc, Philadelphia, 2010)
Two different types cordierite/silicon carbide composite ceramic materials (KS 50 and KZ 50) were used for this investigation. Both materials were exposed to the water quench test from 950 degrees C, applying various numbers ...
catena-Poly[[[(di-2-pyridylamine-kappa N-2(2),N-2 ')copper(II)]-mu-benzene-1,3-dicarboxylato-kappa O-3(1),O-1 ':O-3] monohydrate], a zigzag coordination polymer with strong pi-pi interactions
(Wiley-Blackwell, Hoboken, 2011)
The novel title coordination polymer, {[Cu(C8H4O4)-(C10H9N3)]center dot H2O}(n), synthesized by the slow-diffusion method, takes the form of one-dimensional zigzag chains built up of Cu-II cations linked by benzene-1,3-d ...