Претраживање
Приказ резултата 331-339 од 339
The influence of basalt content on the properties of austenitic stainless steel 316L
(Belgrade : Materials Research Society of Serbia, 2018)
The aim of the paper is to examine the influence of basalt content on the properties of austenitic
stainless steel as well as the possibility of using this composite material for wider industrial
application. In the ...
Image analysis as a useful tool for fast detection of dimensional and structural changes of poly(ethylene terephthalate) containers
(Savez hemijskih inženjera, Beograd, 2018)
The aim of this paper is to present image analysis as a useful technique for fast, reliable and non-destructive detection of dimensional and structural changes in polymers. The possibility of applying image analysis was ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
Cavitation of refratory samples based on talc and domestic zeolite / Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses
(Elsevier Science Bv, Amsterdam, 2018)
In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...