Pretraživanje
Prikaz rezultata 811-820 od 843
Zinc oxide nanoparticles prepared by thermal decomposition of zinc benzenepolycarboxylato precursors: Photoluminescent, photocatalytic and antimicrobial properties / Наночестични прахови цинк-оксида добијени термичком деградацијом цинк-бензенполикарбоксилато прекурсора: фотолуминесцентна, фотокаталитичка и антимикробна својства
(Serbian Chemical Society, 2020)
Zinc oxide (ZnO) nanoparticles were obtained by thermal decomposition of one-dimensional zinc-benzenepolycarboxylato complexes as single-source precursors at 450 °C in an air atmosphere. The mechanism and kinetics of thermal ...
Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization / Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija
(Serbian Chemical Society, 2012)
A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched ...
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
CFD analysis of exothermic reactions in al-au nano multi-layered foils
(Institute of Metals and Technology, 2011)
This work presents the possibility of numerical modelling using Computational Fluid Dynamics (CFD) in the field of nano-foils. The governing equations were solved using a Finite Volume Methodology (FVM). The computational ...
Sorption of different phenol derivatives on a functionalized macroporous nanocomposite of poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) and acid modified bentonite
(Serbian Chemical Society, 2014)
Macroporous nanocomposite of poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) and acid modified bentonite was prepared by radical suspension copolymerization. Nanocomposite was functionalized with diethylenetriamine ...
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Arsenic Removal from Water Using Industrial By-Products
(Hindawi Limited, 2013)
In this study, removal of arsenic ions using two industrial by-products as adsorbents is represented. Removal of As(III) and As(V) from water was carried out with industrial by-products: residual from the groundwater ...
A novel platinum-based nanocatalyst at a niobia-doped titania support for the hydrogen oxidation reaction
(Journal of the Serbian Chemical Society, 2011)
The kinetics of the hydrogen oxidation reaction (HOR) was studied at Pt nanoparticles supported on niobia-doped titania (Pt/N-T). The catalyst support, with the composition of 0.05NbO(2.5-delta)-0.995TiO(2) (0 LT delta LT ...