Претраживање
Приказ резултата 1-10 од 28
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Biocomposite membranes of highly methylated pectin and mesoporous silica SBA-15
(Elsevier Ltd., 2014)
Manufacturing of synthetic composites consumes huge energy and their disposal at the end of the life cycle is very difficult since there is virtually no recycling option. Therefore, biocomposite materials have recently ...
Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
(Elsevier Science Sa, Lausanne, 2018)
effect of initial microstructure on the mechanical properties and fracture mode of the Ti-6Al-4V ELI alloy subjected to the high-pressure torsion (HPT) processing at room temperature and 500 degrees C was investigated. In ...
Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method
(Elsevier Sci Ltd, Oxford, 2016)
The chemical synthesis of nickel manganite powder was performed by a complex polymerization method (CPM). The obtained fine nanoscaled powders were uniaxially pressed and sintered at different temperatures: 1000-1200 degrees ...
In vitro cytotoxicity assessment of intelligent acrylate based hydrogels with incorporated copper in wound management
(Elsevier Science Sa, Lausanne, 2016)
In order to evaluate biological response and potential toxicity prior to clinical use as wound dressing materials, three series of hydrogels, based on 2-hydroxyethyl acrylate (HEA) and itaconic acid (IA), unloaded, with ...
Polyurethane networks based on polycaprolactone and hyperbranched polyester: Structural, thermal and mechanical investigation
(Elsevier Science Sa, Lausanne, 2019)
A series of environmentally friendly polyurethane (PU) networks based on polycaprolactone as soft segment (SS) and Boltorn (R) aliphatic hyperbranched polyester of the second pseudo generation as crosslinking agent was ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Elsevier Sci Ltd, Oxford, 2019)
Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...
Composite nanostructured hydroxyapatite/yttrium stabilized zirconia dental inserts - The processing and application as dentin substitutes
(Elsevier Sci Ltd, Oxford, 2018)
The objective of the study was to process nano-structured hydroxyapatite/yttrium-stabilized zirconia bioceramic and to investigate the possibilities of its application as dentin replacement in the form of dental inserts. ...