Претраживање
Приказ резултата 31-39 од 39
Polyurethane networks based on polycaprolactone and hyperbranched polyester: Structural, thermal and mechanical investigation
(Elsevier Science Sa, Lausanne, 2019)
A series of environmentally friendly polyurethane (PU) networks based on polycaprolactone as soft segment (SS) and Boltorn (R) aliphatic hyperbranched polyester of the second pseudo generation as crosslinking agent was ...
Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials
(International Conference on New Technologies, Development and Application, NT 2020, 2021)
Halloysite nanotubes (HNTs), naturally occurring as aluminosilicate nanoclay mineral, have recently emerged as a possible nanomaterial for countless applications due to their specific chemical structure, tubular shape, ...
Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)
(Progress in Organic Coatings, 2021)
A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine ...
In vitro cytotoxicity assessment of intelligent acrylate based hydrogels with incorporated copper in wound management
(Elsevier Science Sa, Lausanne, 2016)
In order to evaluate biological response and potential toxicity prior to clinical use as wound dressing materials, three series of hydrogels, based on 2-hydroxyethyl acrylate (HEA) and itaconic acid (IA), unloaded, with ...
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
(Elsevier Sci Ltd, Oxford, 2009)
A nanosized HAP powder was sintered and hot pressed, in order to obtain dense HAP ceramics. In a first series of experiments, the powder was isostatically pressed into uniform green compacts and sintered at temperatures ...
Influence of microstructure and phase composition on the nanoindentation characterization of bioceramic materials based on hydroxyapatite
(Elsevier Sci Ltd, Oxford, 2009)
The aim of the study was to investigate the influence of microstructure and phase composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/beta-tricalcium phosphate (beta-TCP) bioceramic materials ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Thermoplastic Copolyester Elastomers
(Handbook of Engineering and Speciality Thermoplastics: Polyethers and Polyesters, 2011)
In this chapter the preparation, structure and properties of thermoplastic copolyester elastomers, TPEE, are presented. TPEEs are multiblock copolymers built up from so-called short crystallizable hard segments and long ...
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
(Springer, New York, 2020)
Composites based on poly(methyl methacrylate), dimethyl itaconate matrix and alumina particles were prepared. Ferrous oxide-doped alumina particles (Al2O3Fe) and commercial alumina nanoparticles (Al(2)O(3)n) modified with ...