Претраживање
Приказ резултата 31-40 од 47
Swelling kinetics and impregnation of PLA with thymol under supercritical CO2 conditions / Kinetika bubrenja PLA i njegova impregnacija timolom upotrebom natkritičnog uglenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2016)
The present work was aimed to study swelling kinetics of polylactic acid (PLA) and its impregnation with thymol in supercritical carbon dioxide (scCO2) medium. The influences of temperature and soaking time on the swelling ...
Optimal conditions of vacuum distillation process for obtaining the high grade pure magnesium / Optimalni uslovi porcesa vakuumske destilacije za dobijanje magnezijuma visoke čistoće
(Savez inženjera i tehničara Srbije, Beograd, 2014)
In this paper the procedure of obtaining of high purity magnesium by using the vacuum distillation process has been shown. Vacuum distillation process has been conducted under low and high vacuum at different operating ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles / Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2020)
Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid / Atmosfersko luženje bakra iz oksidno-sulfidne rude rastvorom sumporne kiseline
(Savez inženjera i tehničara Srbije, Beograd, 2020)
High flexibility of hydrometallurgical operations as well as economic and environmental acceptability, offer the opportunity to selectively obtain metals in the early stages of the processing. This enables the application ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Adsorption study of cadmium ions on kaolinite modified by histidine and cysteine / Adsorpcija kadmijumovih jona na kaolinitu modifikovanim histidinom i cisteinom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Continuous development of new technologies leads to increasing pollution of water, thus creating the need for new materials that could be used in the processes of its purification. Therefore, adsorbents prepared from ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Influence of whey proteins addition on mechanical stability of biopolymer beads with immobilized probiotics / Uticaj dodatka proteina surutke na mehaničku stabilnost biopolimernih nosača sa imobilisanim probioticima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Biopolymer carriers are widely used for immobilization of the bioactive compounds and different type of the cells. The aim of this study was to analyze influence of whey proteins addition on mechanical strength of Ca-alginate ...