Претраживање
Приказ резултата 11-20 од 47
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
Sepiolite from Serbian deposits as an industrial mineral / Sepiolit iz ležišta u Srbiji kao industrijski mineral
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Long-termed geological exploration of sepiolite in Serbia has proved that there exist two structuralmorphological types of sepiolite deposits: the vein type - in ultrabasic rocks, associated with vein magnesite deposits ...
Infuence of solvent on the stability of electrospinning of PMMA nanofibers / Uticaj rastvarača na stabilnost procesa elektropredenja polimernih nanovlakana
(Savez inženjera i tehničara Srbije, Beograd, 2014)
In this paper the process of electrospinning of PMMA nanofibers was investigated. The influence of process parameters (type of solvent, solution concentration, flow rate, distance of needle and collector) on the nanofibers ...
An alternative route for valorization of valuable metals from jarosite residue / Alternativna metoda za valorizaciju vrednih metala iz jarosit ostatka
(Savez inženjera i tehničara Srbije, Beograd, 2019)
This paper aims to consider the treatment of jarosite residue using a different reducing agents, aluminum, magnesium, and carbon. The jarosite residue is not standard-it contains higher amounts of Pb and Ag, as well as in, ...
Development of refractory coatings for application in the Lost Foam casting process / Razvoj vatrostalnih premaza za primenu u Lost foam procesu livenja
(Savez inženjera i tehničara Srbije, Beograd, 2011)
In this work, the results of examining the possibilities of use of a number of ceramic powders for manufacturing the coatings for polymeric models and their application in the Loast Foam casting process. According to it, ...
The influence of mechanical activation of ceramic powders on the quality of casting coatings / Uticaj mehaničke aktivacije keramičkih prahova na kvalitet livačkih premaza
(Savez inženjera i tehničara Srbije, Beograd, 2011)
In order to increase the efficiency of coatings, the influence of mechanical activation has been studied by monitoring the changes of surface and energy state, the change of structure and properties of ceramic powders under ...
Measures and methods for NOx reduction from glass-melting furnaces / Mere i metode za smanjenja emisije oksida azota iz peći za topljenje stakla
(Savez inženjera i tehničara Srbije, Beograd, 2011)
The nitrogen oxides emitted to atmosphere effect significantly on formation of photochemical smog, acidic rains and destroying of ozone shell of the earth. Therefore, the regulations for limited emission of nitrogen oxides ...
Micromechanical properties of composite systems consisting of electrodeposited nickel coatings on different substrates / Mikromehanička svojstva kompozitnih sistema formiranih elektrohemijskim taloženjem filmova nikla i bakra na različitim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2012)
Fine-grained nickel and copper thin films were electrodeposited (ED) from self-made sulphamate and sulphate electrolytes, respectively, on different substrates. The substrates were single crystal silicon with two different ...