Претраживање
Приказ резултата 31-40 од 58
Modelling and optimization of surfactant sensor response characteristics for the use in surface water and wastewater analysis / Modelovanje i optimizovanje održivih karakteristika tenzidnog senzora za korišćenje pri analizi površinskih i otpadnih voda
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The theoretical model of potentiometric titration curves of sodium dodecyl sulfate (anionic surfactant) was proposed and the response parameters of two surfactant sensors (commercial and self-made) were investigated. The ...
Time: Temperature superposition principle: Application of WLF equation in polymer analysis and composites / Princip superponiranja vremena i temperature - primena WLF jednačine za ispitivanje polimera i kompozita
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Polymers are the most studied viscoelastic material. The shorter times (high frequencies) corresponding to lower temperatures and long times (low frequencies) to high temperatures. This represents the quantitatively applied ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
The comparative study of the corrosion stability of Zn-Ni-Co alloy coatings deposited from chloride and sulphate baths / Uporedna analiza korozione stabilnosti prevlaka Zn-Ni-Co legura elektrohemijski taloženih iz hloridnih i sulfatnih rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The ternary Zn-Ni-Co alloy coatings were electrodeposited on steel from chloride and sulphate baths. The deposition was carried out galvanostatically at different current densities at ambient temperatures from additives ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
Studying of physicochemical properties of newly synthesized uracil derivatives / Proučavanje fizičko-hemijskih svojstava novosintetisanih derivata uracila
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Uracil derivatives are potentially biologically active compounds, so the investigation of their physical and chemical properties is very important for their further application. In this work a series of newly synthesized ...
The characterization of ternary Zn-Ni-Co alloy coatings electrochemically deposited on steel from sulfate solution / Karakterizacija prevlaka trojnih legura Zn-Ni-Co na čeliku elektrolitički taloženih iz sulfatnog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this work the electrochemical deposition of ternary Zn-Ni-Co alloy coatings on steel from sulfate, additive-free electrolyte, was investigated. The ratio of metal cations [Co2+]/[Ni2+] in the plating solution was analysed, ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...