Pretraživanje
Prikaz rezultata 1-10 od 108
Corrosion studies on electrochemically deposited polyaniline and polyaniline/epoxy coatings on mild steel in acid sulfate solution / Koroziono ispitivanje elektrohemijski taloženog polianilina i polianilina/epoksi prevlaka na mekom čeliku u rastvoru sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
The corrosion behavior of mild steel, mild steel covered by electrochemically deposited polyaniline (PANI) film, epoxy coating and PANI/epoxy coating system in 0.1 M sulfuric acid solution, were investigated by electrochemical ...
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
Formation of approximate differential equations for electrical and molar conductivity determinations of sulfuric acid aqueous solution / Formiranje aproksimacionih diferencijalnih jednačina za određivanje električne i molarne provodljivosti vodenog rastvora sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
In this paper formation of linear differential equations for approximate determination of electrical and molar conductivity of sulfuric-acid solutions, has been give.
Influence of the synthesis procedures on pt catalyst activity for ethanol electrooxidation reaction / Uticaj postupka sinteze na aktivnost platinskih katalizatora za reakciju elektrooksidacije etanola
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Carbon supported platinum catalysts for ethanol electrooxidation were synthesized by modified polyol synthesis method, assisted by microwave or reflux heating. Synthesized catalysts were characterized by XRD, STM and TGA ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Inženjersko društvo za koroziju, Beograd, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Electrochemical deposition and corrosion stability of Zn-Co alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Co legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
The influence of the type of the deposition solution, deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Co alloys was examined. Alloys were deposited ...
Electrochemical deposition and characterization of Zn-Fe alloy coatings / Elektrohemijsko dobijanje i karakterizacija prevlaka legura cink-gvožđe
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The influence of the deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Fe alloys was examined. Alloys were deposited on a rotating disc electrode and ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Inženjersko društvo za koroziju, Beograd, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...