Претраживање
Приказ резултата 1021-1030 од 1032
Comparison of cavitation erosion behavior of cordierite and zircon based samples using image and morphological analyses
(Elsevier Science Bv, Amsterdam, 2018)
In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory ...
New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach
(Elsevier Science Inc, New York, 2018)
The aim of this study was to examine the influence of cavitation erosion on the morphology of defects formed on the surfaces of alumina-based materials. The alumina-based samples were exposed to cavitation erosion for 42 ...
Advanced technology for photocatalytic degradation of thiophanate-methyl: Degradation pathways, DFT calculations and embryotoxic potential
(Institution of Chemical Engineers, 2023)
This study focuses on establishing an efficient two-step technology, which includes: (1) consecutive adsorption-desorption, using cellulose-based membranes, bCells, and (2) photocatalytic degradation of the fungicide ...
Hybrid material based on subgleba of mosaic puffball mushroom (Handkea utriformis) as an adsorbent for heavy metal removal from aqueous solutions
(Journal of Environmental Management, 2021)
The alkali treated subglebal tissue of the mosaic puffball (Handkea utriformis) (Sa) and Sa modified with hydroxyapatite (Sa-HAp), obtained by successive ionic layer adsorption and reaction (SILAR) method, were used for ...
Utilization of agro-industrial waste for removal of copper ions from aqueous solutions and mining-wastewater
(Elsevier Science Inc, New York, 2019)
In this study, unmodified lemon peel, as agro-industrial waste, was used to investigate removal efficiency of copper ions from aqueous solutions and mining wastewater. The effects of solution pH, adsorption time, metal ion ...
Synthesis of Silica Particles Using Ultrasonic Spray Pyrolysis Method
(Metals, 2021)
Silica has sparked strong interest in hydrometallurgy, catalysis, the cement industry, and paper coating. The synthesis of silica particles was performed at 900 degrees C using the ultrasonic spray pyrolysis (USP) method. ...
Advanced damage resistance monitoring procedure on the composite materials? surface-exposed to cavitation testing
(Wear, 2021)
Morphology and development of surface damage of alumina-based materials, resulting from cavitation erosion is studied in this paper. Two series of samples were prepared: samples without fibers and those with the addition ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
The influence of different extraction conditions on polyphenol content, antioxidant and antimicrobial activities of wild thyme
(Journal of Applied Research on Medicinal and Aromatic Plants, 2021)
The aims of the presented study were the investigation of the effect of different ultrasound-assisted extraction conditions (particle size, solid-to-solvent ratio, ethanol concentration and time) on polyphenol and flavonoid ...
Microstructural and Cavitation Erosion Behavior of the CuAlNi Shape Memory Alloy
(Metals, 2021)
Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885 ...