Претраживање
Приказ резултата 1-10 од 1467
Electrochemical testing of noble metal dental alloys: The influence of their chemical composition on the corrosion resistance
(Corrosion Science, 2021)
Platinum and nine commercial dental alloys with the contents of noble metals ranging from 27 wt.% to 97.6 wt. % were investigated by the procedure described in the Standard ISO 10271:2009, Electrochemical testing was ...
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
(MDPI, 2023)
Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the ...
Investigation on the Adsorption of the Carbamate Pesticide Methomyl from Aqueous Solution using Modified Co-Beta Zeolite Particles
(International Institute for the Science of Sintering (IISS), 2023)
Adsorption of carbamate pesticide Methomyl by Co-Beta Zeolite particles prepared by wet ion-exchange method from aqueous solutions was studied. The effect of zeolite and pesticide concentrations, pH value, and sintering ...
A novel method of preparing the silver chloride cathode for the magnesium seawater activated primary cell
(Journal of Power Sources, 2021)
The novel method based on the inexpensive and fast modified successive ion layer adsorption and reaction (SILAR) method of preparing silver chloride cathode on the carbon felt is developed. The electrochemical behavior of ...
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
(Springer-Verlag, 2020)
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has beeninvestigated. Morphological and structural characteristics of this electrode type obtained by various ...
Influence of N doping on structural and photocatalytic properties of hydrothermally synthesized TiO2/carbon composites
(Journal of the Serbian Chemical Society, 2023)
Abstract: N-doped TiO2/carbon composites (TiO2/CN) with different nitrogen content, were obtained starting from titanium isopropoxide and glucose, and by varying the amount of melamine, added to starting reaction mixture. ...
Assessing the potential of para-donor and para-acceptor substituted 5-benzylidenebarbituric acid derivatives as push-pull electronic systems: Experimental and quantum chemical study
(Spectrochimica Acta Part A-Molecular and Biomolecular Spectroscopy, 2021)
Electronic interactions in donor-pi-linker-acceptor systems with barbituric acid as an electron acceptor and possible electron donor were investigated to screen promising candidates with a push-pull character based on ...
Micro Nanofibrillated Cellulose as Functional Additive Supporting Processability of Surface-Active Mineral Suspensions: Exemplified by Pixel Coating of an NOx-Sorbent Layer
(MDPI, 2023)
Unlike established coating formulations, functional particulate coatings often demand the omission of polymer dispersant so as to retain surface functionality. This results in heterogeneous complex rheology. We take an ...
Cross-linking the peroxidase: From potato peel valorization to colored effluents treatment
(Institute of Physics, 2022)
Despite the obvious benefits from mass production such as an increased productivity, lower product cost and rapid evolution, nowadays we are dealing with energy consumption issues and pollution. The generated waste poses ...
Erratum to: Solubility in K+–Na+–Mg (2+)– SO (4) (2-) Aqueous Solution at T = 298.15 K (Russian Journal of Physical Chemistry A, (2013), 87, 13, (2181-2186), 10.1134/S0036024413130219)
(Pleiades Publishing, 2023)
The title of the article should read as follows: Solubility in K+–Na+–Mg (2+)– SO (4) (2-) Aqueous Solution at T = 298.15 K.