Претраживање
Приказ резултата 1-10 од 17
Antibacterial and UV protective properties of polyamide fabric impregnated with TiO2/Ag nanoparticles
(Srpsko hemijsko društvo, Beograd, 2015)
The possibility of in situ photoreduction of Ag+ using colloidal TiO2 nanoparticles deposited on the surface of polyamide fabric in the presence of the amino acid alanine and methanol is discussed. The presence of TiO2/Ag ...
In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
(Srpsko hemijsko društvo, Beograd, 2015)
Metallic materials, such as Co-Cr-Mo alloys, are exposed to aggressive conditions in the oral cavity that represents an ideal environment for metallic ion release and biodegradation. The metallic ions released from dental ...
Influence of clay organic modifier on the morphology and performance of poly(epsilon-caprolactone)/clay nanocomposites
(Srpsko hemijsko društvo, Beograd, 2015)
Two series of poly(epsilon-caprolactone) poly(oxepan-2-one) nanocomposites with different organo-modified clays (1 to 8 wt. %) were prepared by the solution casting method. Organoclays with polar (Cloisite (R) C30B) and ...
The porosity and roughness of electrodeposited calcium phosphate coatings in simulated body fluid
(Srpsko hemijsko društvo, Beograd, 2015)
Calcium phosphate coatings were electrochemically deposited on titanium from an aqueous solution of Ca(NO3)(2) and NH4H2PO4 at a current density of 10 mA cm(-2) for a deposition time of 15 mm. The obtained brushite coatings ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Srpsko hemijsko društvo, Beograd, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Modification of natural clinoptilolite and ZSM-5 with different oxides and a study of the obtained products in lignin pyrolysis
(Srpsko hemijsko društvo, Beograd, 2015)
In this work, different metal oxides (MO) supported on two types of zeolites: 1) natural clinoptilolite (NZ) and 2) synthetic zeolite, ZSM-5 were prepared and tested as catalysts in the fast pyrolysis of hardwood lignin. ...
Antibacterial activity of copper-containing clinoptilolite/PVC composites toward clinical isolate of Acinetobacter baumannii
(Srpsko hemijsko društvo, Beograd, 2015)
The multidrug-resistant bacteria Acinetobacter baumannii cause serious hospital infections. Commercial poly(vinyl chloride) (PVC) used for endotracheal tubes was modified in order to obtain a composite with an antibacterial ...
An apparatus proposed for density measurements in compressed liquid regions at pressures of 0.1-60 MPa and temperatures of 288.15-413.15 K
(Srpsko hemijsko društvo, Beograd, 2015)
In this work, an apparatus for density measurements in the compressed liquid regions is presented. This installation is based on the use of a DMA HP density measuring cell and a DMA 5000 densimeter (both instruments are ...
Electrochemical decolorization of the Reactive Orange 16 dye using a dimensionally stable Ti/PtOx anode
(Srpsko hemijsko društvo, Beograd, 2015)
The electrochemical decolorization of Reactive Orange 16 in a chloride containing solution was studied using a dimensionally stable Ti/PtOx anode. Different reaction parameters, agitation speed, applied current, sodium ...