Pretraživanje
Prikaz rezultata 1-10 od 15
Ultra-high pressure densification and properties of nanostructured SiC
(Elsevier Science Bv, Amsterdam, 2016)
Cubic SiC nano-powder particles were synthesized by a sal-gel process with an average grains size of 9.5 nm which were subsequently densified by using a high-pressure "anvil-type with hollows" apparatus at a pressure of 4 ...
Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag
(Elsevier Science Bv, Amsterdam, 2016)
Geopolymeric binders (GB) were produced using fly ash (FA) and electric arc furnace slag (EAFS). The slag has been added in the range of 0-40%. The effects of slag content on the strength, microstructure and thermal ...
Chitosan-triclosan films for potential use as bio-antimicrobial bags in healthcare sector
(Elsevier, Amsterdam, 2017)
In this work, antimicrobial bioinspired films made from chitosan incorporated with triclosan were investigated. The tensile strenght of these films were in the range of 33 and 39 MPa, which presented satisfied mechanical ...
A facile route for hydroxyapatite densification with an increased heating rate
(Elsevier Science Bv, Amsterdam, 2017)
The densification behavior of hydroxyapatite nanorods prepared by chemical precipitation method in open reactor conditions was investigated by application of different heating rates. The non-isothermal processing was ...
Thermal shock behavior of alumina based refractories: fracture resistance parameters and water quench test
(Elsevier, Amsterdam, 1999)
The prediction of refractories thermal shock behavior can be estimated on two basis: heat transfer conditions and/or fracture mechanics concept. Materials considered in our analysis were alumina based refractories with ...
Structural analysis of abrasive composite materials with nonwoven textile matrix
(Elsevier B.V., 2004)
The goal of this research was to design the novel composite material based on nonwoven textile material (NTM) while using the existing production facilities. The chosen product was abrasive composite material with nonwoven ...
Evaluation of the antibacterial effectiveness of novel copper/polypyrrole nanocomposite
(Elsevier B.V., 2023)
A novel and effective antibacterial agent based on a combination of copper nanoparticles (CuNPs) and polypyrrole (PPy) is presented. By using a straightforward in situ polymerization method in water, a copper/polypyrrole ...
Optical fibers with composite magnetic coating
(Elsevier, 2002)
The goal of these investigations was to define the process parameters that enable the formation of a composite coating with the most uniform thickness on an optical fiber. The composite coating was obtained by drawing the ...
Contribution to study of processes on the steel cast-sand mould contact surface during casting
(Elsevier Science B.V., 2000)
The testings involved in this paper were part of a comprehensive research project conducted to find out what complex processes were taking place at metal-mould contact surface. These investigations are of particular ...
Evaluation of novel antiproliferative controlled drug delivery system based on poly(2-hydroxypropyl acrylate/itaconic acid) hydrogels and nickel complex with Oxaprozin
(Elsevier, Amsterdam, 2016)
A series of dual-sensitive poly(2-hydroxypropyl acrylate/itaconic acid) (P(HPA/IA)) hydrogels were synthesized and evaluated as potential highly effective antiproliferative drug delivery system. Investigated hydrophobic ...