Претраживање
Приказ резултата 1-10 од 21
Modification of multi-wall carbon nanotubes for the removal of cadmium, lead and arsenic from wastewater
(Inst Materials Physics, Bucharest, 2013)
Multi-wall carbon nanotubes (MWCNTs) was functionalized with 6-arm amino polyethylene glycol (PEG), and synthesized PEG-MWCNTs was used as adsorbent in order to study adsorption characteristics with respect to Cd(II), ...
Removal of magnesium in spring water using the natural zeolite in a continuous flow system / Uklanjanje magnezijuma iz izvorske vode pomoću prirodnog zeolita u protočnom sistemu
(Association of Chemical Engineers of Serbia, 2014)
The aim of this work is an investigation of the possible application of Serbian natural zeolitic tuff ('Igroš Vidojević' deposit, Brus, Serbia) for improvement of the spring water quality. The concentration of magnesium ...
Alumina Particles Doped With Ferric as Efficient Adsorbent for Removal of Reactive Orange 16 from Aqueous Solutions
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Ferric oxide doped alumina particles were prepared via the sol-gel method and their performance as Reactive Orange 16 adsorbent was evaluated. The concentrations of the Reactive Orange 16 were monitored using a UV-Vis ...
Enhanced sorption of Cu2+ from sulfate solutions onto modified electric arc furnace slag
(Elsevier Science Bv, Amsterdam, 2019)
Pristine electric arc furnace slag (EAFS) as well as EAFS modified by alkali activation i.e. alkali activated slag (AAS) have found a novel application as adsorbents used in Cu2+ removal from sulfate solutions. The adsorption ...
Amides as a model system of low molar mass algal organic matter. Influence on the adsorption of p-nitrophenol on activated carbon
(Elsevier, Amsterdam, 2020)
In this study, the adsorption equilibrium and diffusivity parameters of p-nitrophenol were estimated for water containing different concentrations of secondary amides. Commercial powdered activated carbon was used as an ...
Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal
(Springer Heidelberg, Heidelberg, 2019)
Iron oxide, in the form of magnetite (MG)-functionalized porous wollastonite (WL), was used as an adsorbent for heavy metal ions (cadmium and nickel) and oxyanions (chromate and phosphate) removal from water. The porous ...
Adsorption of Candida rugosa lipase onto alumina: effect of surface charge
(Serbian Chemical Society, 2015)
The impact of the surface charge of alumina supports on the adsorption of Candida rugosa lipase was investigated in terms of the zeta potentials of the adsorption partners. The lipase adhered onto alumina with similar ...
Ultrasonic assisted arsenate adsorption on solvothermally synthesized calcite modified by goethite, alpha-MnO2 and goethite/alpha-MnO2
(Elsevier, Amsterdam, 2014)
A highly porous calcium carbonate (calcite; sorbent 1) was used as a support for modification with alpha-FeOOH (calcite/goethite; sorbent 2), alpha-MnO2 (calcite/alpha-MnO2; sorbent 3) and alpha-FeOOH/alpha-MnO2 ...
Modeling of disperse dye adsorption on modified polyester fibers
(University of Novi Sad, Faculty of Technology, 2020)
The results of the research on the ability of adsorption of dye on polyester fibers at a temperature of 98 °C are presented in this paper. The fibers were previously modified in aqueous solutions of NaOH, KOH or Al(OH)3. ...
Polyaniline stabilization of magnetic particles and immobilization of alpha-amylase
(Savez hemijskih inženjera, Beograd, 2018)
Magnetic particles (MAG), obtained by standard procedure of coprecipitation of Fe2+ and Fe3+ in an excess of ammonia, and polyaniline modified magnetic particles MAG-PANI were used as carriers for immobilization of a-amylase ...