Search
Now showing items 1-10 of 21
Sol-gel Synthesis of Anatase Nanopowders for Efficient Photocatalytic Degradation of Herbicide Clomazone in Aqueous Media
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
TiO2 nanopowders were produced by sol-gel technique using TiCl4 as a starting material. For the preparation of crystalline anatase with developed surface area, this aqueous solution has been mixed with 0.05 M or 0.07 M ...
Non-Isothermal Crystallization of Lithium Germanophosphate Glass Studied by Different Kinetic Methods
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Crystallization kinetics of 22.5Li(2)O center dot 10Al(2)O(3)center dot 30GeO(2)center dot 37.5P(2)O(5) (mol%) glass was studied under non-isothermal condition using the differential thermal analysis (DTA). The study was ...
Alumina Particles Doped With Ferric as Efficient Adsorbent for Removal of Reactive Orange 16 from Aqueous Solutions
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Ferric oxide doped alumina particles were prepared via the sol-gel method and their performance as Reactive Orange 16 adsorbent was evaluated. The concentrations of the Reactive Orange 16 were monitored using a UV-Vis ...
The effect of K2O on the crystallization of niobium germanate glasses
(International Institute for the Science of Sintering, Beograd, 2011)
The effect of K2O content on the crystallization of niobium germanate glasses with 22.7- 24.27 wt% of GeO2 and 54.59-57.48 wt% of Nb2O5 was examined. The glasses crystallize by primary crystallization and the formed ...
Formation of Porous Wollastonite-based Ceramics after Sintering With Yeast as the Pore-forming Agent
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
Electrospun Alumina Fibers Doped With Ferric and Magnesium Oxides
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
It is well known that alumina possesses good mechanical and chemical properties. Nanofibers having alpha - alumina structure was used as reinforcement for metal, polymer and ceramic matrix composites. In this study, three ...
Structure and photocatalytic properties of sintered TiO2 nanotube arrays
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
Magnetic properties of ND Rich Melt-Spun ND-FE-B alloy
(International Institute for the Science of Sintering, Beograd, 2005)
As a part of these experimental investigations of melt-spun Nd-Fe-B alloy with Nd rich content in relation to Nd2Fe14B prepared by rapid quenching process for optimally selected cooling rate and heat treatment, the influence ...
Mechanical properties of biomorphic silicon carbide ceramics
(International Institute for the Science of Sintering, Beograd, 2011)
Biomorphous β-SiC ceramics were produced from linden wood by impregnation with tetraethyl orthosilicate (TEOS), followed pyrolysis and high temperature treatment at 1580°C. Six specimen groups included charcoal and five ...