Pretraživanje
Prikaz rezultata 21-30 od 40
Adsorptive pretreatment of waste cooking oil using quicklime for fatty acid methyl esters synthesis
(Association of the Chemical Engineers of Serbia, 2023)
Synthesis of biodiesel from various plant oils is realized by the transesterification of triglycerides with methanol or by a reaction usually defined as methanolysis. The usage of low-quality oils, such as waste cooking ...
Thermo-mechanical analysis of linear welding stage in friction stir welding Influence of Welding Parameters
(VINČA Institute of Nuclear Sciences, 2022)
The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Processing of Data Obtained by the Testing of Steel under Low Cyclic Fatigue (Part I)
(University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, 2022)
The design of mechanical components exposed to fatigue load, at a low number of cycles, requires knowledge of the behaviour of the material under the impact of variable load in conditions of controlled strain when cyclic ...
Beech sawdust based adsorbents for solid-phase extraction of pesticides and pharmaceuticals
(Serbian Chemical Society, 2022)
Carbonaceous solid-phase extraction (SPE) sorbent, efficient in isol-ation and enrichment of multiclass pesticides and pharmaceuticals from water, was synthesized starting from cheap waste beech sawdust and using KOH as ...
Mass transfer in inverse fluidized beds / Prenos mase u inverzno fluidizovanom sloju
(Serbian Chemical Society, 2023)
In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and ...
INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS / УТИЦАЈ ГАСНИХ ЛАСЕРА У КОНТИНУАЛНОМ И ИМПУЛСНОМ РЕЖИМУ НА КАРАКТЕРИСТИКЕ БИОМАТЕРИЈАЛА
(Vinca Inst Nuclear Sci, 2023)
Aromatic plants and laser beam wavelength in the red range of visible spectra (623.8 nm), most commonly used for treating plant species, were selected. As there is not much information in the references, it is necessary ...
Optimization of the extraction of antioxidants from stinging nettle leaf using response surface methodology
(Macedonian Journal of Chemistry and Chemical Engineering, 2022)
The aim of this study was to optimize the parameters for the extraction of total flavonoids from stinging nettle leaf. Comparison of the effects of different solvents on total flavonoid content showed that, regardless of ...
Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint
(Strojarski Facultet, 2023)
Fracture mechanics, as a scientific discipline dealing with the study of cracks in welded structures, has defined parameters and introduced new test methods in order to better determine the tendency to crack growth, critical ...
Star-shaped poly(ε-caprolactones) with well-defined architecture as potential drug carriers / РАЗГРАНАТИ ПОЛИ(ε-КАПРОЛАКТОНИ) СА ДОБРО ОДРЕЂЕНОМ АРХИТЕКТУРОМ КАО ПОТЕНЦИЈАЛНИ НОСАЧИ ЛЕКОВА
(Serbian Chemical Society, 2022)
The present study reports the potential application of star-shaped poly(ε-caprolactones) with different number of arms as new drug delivery matrix. Linear and star-shaped PCL ibuprofen loaded microspheres were prepared ...
THE EFFICIENCY OF GAS-FILLED SURGE ARRESTERS IN THE ENVIRONMENT CONTAMINATED BY NON-IONIZING RADIATION OF FUSION REACTORS
(Vinca Inst Nuclear Sci, 2022)
The research presents an experiment with a model of an electronic generator for energy injec- tion into the plasma of a fusion reactor. By recording a non-ionizing field in the vicinity of a fusion reactor, it was determined ...