Претраживање
Приказ резултата 51-60 од 101
Micromechanical properties and thermal stability of adhesives for optical fibers based on ethylene-vinyl acetate copolymer / Mikromehanička svojstva i termička stabilnost adheziva za optička vlakna na bazi kopolimera etilena i vinil-acetata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Optical fibers are used for transfer of information when the reliable system was required, and in some situations it is necessary to transport optical fibers on the drums and to enable controlled and fast unwinding from ...
Synthesis and characterisation of tin and tungsten sulfide powders for application in tribological materials / Sinteza i karakterizacija prahova sulfida kalaja i volframa za primenu u tribološkim materijalima
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2020)
This PhD thesis presents the process of synthesis of tin and tungsten sulfides powders for application in tribological materials by determining the optimal parameters of the synthesis process based on the results of the ...
Synthesis and characterization of carbon materials as titanium dioxide carrier for removal of the selected organic pollutants from water / Sinteza i karakterizacija ugljeničnih materijala kao nosača titan-dioksida za uklanjanje odabranih organskih zagađujućih materijala iz vode
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
The main objective of this work was to develope appropriate preparation method in order to obtain TiO2/carbon composites with the highest efficiency in removal of organic pollutants from the water. Carbon monolith and ...
Synthesis and characterization of hydrogels based on 2-hydroxyethyl acrylate and itaconic acid for controlled release of therapeutically active metal ions аpplication. / Sinteza i karakterizacija hidrogelova na bazi 2-hidroksietil akrilata i itakonske kiseline za primenu u kontrolisanom otpuštanju terapeutski aktivnih jona metala
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation, the novel polymeric materials were synthesized as carriers for the incorporation and controlled release of therapeutically active metal ions, for the application in wound treatment and soft ...
Local approach to ductile fracture of low steel welded joints / Lokalni pristup žilavom lomu zavarenih spojeva niskolegiranog čelika
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The subject of this dissertation is analysis of ductile fracture initiation and stable crack growth by ductile fracture mechanism in low alloyed steel and welded joints. The analysis is conducted using local approach to ...
Synthesis and characterization of materials obtained by modification of natural zeolite (clinoptilolite) and phosphate based microporous materials with zeolitic structure / Sinteza i karakterizacija materijala nastalih modifikacijom zeolita (klinoptilolita) i mikroporoznih fosfata sa strukturom zeolita
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the first part of the dissertation, the possibility of modifying the zeolitic tuff from the mine Zlatokop (near Vranjska Banja) was investigated in order to obtain new adsorbents. The second part presents the possibility ...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
Synthesis, characterization and application of undoped and doped nanostructured photocatalysts based on titanium(IV) oxide / Sinteza, karakterizacija i primena nedopiranih i dopiranih nanostrukturnih fotokatalizatora na bazi titan(IV)-oksida
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Titania (TiO2) due to its photocatalytic activity, chemical and biological inertness, resistance to chemical- and photo-corrosion, non-toxicity, and relatively low cost, is one of the most studied semiconductors for ...
New models for energy efficiency improvements in polymer and related industry. / Novi modeli za unapređenje energetske efikasnosti u polimernoj i srodnim industrijama
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
This doctoral dissertation considers the existing methods for energy consumption reduction in the polymer industry, but also explores a development of new methods based on the multi-criteria analysis. The new approach ...
Experimental determination and modeling liquid-liquid equilibria of multicomponent systems of green solvents / Eksperimentalno određivanje i modelovanje ravnoteže tečnost - tečnost višekomponentnih sistema zelenih rastvarača
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In this disertation, experimentally are determined solubilities for binary and pseudo-binary systems, as for thermodynamic liquid-liquid equilibria, and effects of adding different co-solvents on phase equilibria shifting, ...