Претраживање
Приказ резултата 11-20 од 95
Application of supercritical carbon dioxide in fabrication of materials with repellent properties based on pyrethrins / Primena natkritičnog ugljenik(IV)-oksida za dobijanje materijala sa repelentnim svojstvima na bazi piretrina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
This PhD thesis was aimed to investigate the possibility of supercritical solvent impregnation (SSI) of selected polymer materials (cotton fabric, polypropylene (PP) non-woven fabric, polyamide (PA) polymers (fabric, ...
The synthesis of fatty acid methyl esters from waste lard by homegeneously and heterogeneously catalyzed methanolysis / Sinteza metil estara masnih kiselina otpadne svinjske masti primenom homogeno i heterogeno katalizovane metanolize
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation the methanolysis of waste lard from piglet roasting in the presence of KOH, CaO or quicklime at moderate temperatures (below the boiling point of methanol) and the molar ratio of methanol:fatty ...
Zero waste technology of juniper berry (Juniperus communis L.) processing / Bezotpadna tehnologija prerade ploda kleke (Juniperus communis L.)
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
Essential oils are aromatic, volatile, complex mixtures of various compounds, mainly hydrocarbons (monoterpene and sesquiterpene) and oxygenated hydrocarbons. Juniper berry essential oil has wide application and high ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Surface modification of cellulose fibers using dielectric barrier discharge / Modifikovanje površine celuloznih vlakana primenom dielektričnog barijernog pražnjenja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the theoretical part of doctoral dissertation, the most significant literature data concerning cellulose structure and properties have been systematically reviewed. Special attention has been given to the possibilities ...
Crystallization and sinterability of lanthanum-strontium-borate-glass powders / Kristalizacione karakteristike i sinterabilnost prahova lantan-stroncijum-boratnih stakala
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
The subject of this doctoral thesis is the study of the crystallization behavior and the sinterability of the borate glasses system La2O3-B2O3-SrO. In literature there are limited data from the crystallization characteristics ...
Synthesis, characterization and application of undoped and doped nanostructured photocatalysts based on titanium(IV) oxide / Sinteza, karakterizacija i primena nedopiranih i dopiranih nanostrukturnih fotokatalizatora na bazi titan(IV)-oksida
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Titania (TiO2) due to its photocatalytic activity, chemical and biological inertness, resistance to chemical- and photo-corrosion, non-toxicity, and relatively low cost, is one of the most studied semiconductors for ...
New models for energy efficiency improvements in polymer and related industry. / Novi modeli za unapređenje energetske efikasnosti u polimernoj i srodnim industrijama
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
This doctoral dissertation considers the existing methods for energy consumption reduction in the polymer industry, but also explores a development of new methods based on the multi-criteria analysis. The new approach ...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
Synthesis, structure and properties of potentially biologically active derivatives of cycloalkanespiro-5- -hydantoine / Sinteza, struktura i svojstva potencijalno biološki aktivnih derivata cikloalkanspiro-5-hidantoina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
In order to examine solvation effects on the pharmacological properties of hydantoin derivatives, three series of compounds have been synthesized: 3-(4-substituted benzyl)cyclopentanespiro-5-hydantoins, 3-(4-substituted ...