Претраживање
Приказ резултата 721-730 од 730
Gadolinium sorption on multi-walled carbon nanotubes / Sorpcija gadolinijuma na višeslojnim ugljeničnim nanotubama
(Academy of Sciences and Arts of the Republic of Srpska, 2019)
Rare earth metals are deemed to be the materials of future due to their numerous applications including medical diagnostics, nuclear facilities, petroleum industry, etc. In this paper, multi-walled carbon nanotubes, which ...
Cleaner production aspects of tablet coating process in pharmaceutical industry: problem of VOCs emission
(Elsevier Sci Ltd, Oxford, 2013)
The aim of the article is to present a case study related to implementation of cleaner production (CP) process with the concept of minimizing emissions versus the end of pipe (EOP) approach within pharmaceutical industry. ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Design of novel multifunctional Oxaprozin delivery system based on dual-sensitive poly(2-hydroxypropyl acrylate/itaconic acid) hydrogels
(Elsevier Science Bv, Amsterdam, 2015)
Series of novel dual-sensitive poly(2-hydroxypropyl acrylate/itaconic acid) hydrogels were designed as multifunctional drug delivery system which can provide several advantages including drug protection, self-regulated ...
Image analysis as a useful tool for fast detection of dimensional and structural changes of poly(ethylene terephthalate) containers
(Savez hemijskih inženjera, Beograd, 2018)
The aim of this paper is to present image analysis as a useful technique for fast, reliable and non-destructive detection of dimensional and structural changes in polymers. The possibility of applying image analysis was ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
The influence of alumina crystal structures on the morphology and surface erosion of PMMA composite materials exposed to cavitation testing
(Elsevier Science Sa, Lausanne, 2019)
Composites are materials that reach many users and therefore, it is necessary to correlate the properties of every component on the behaviour of the material. Alumina is used as reinforcement with the aim of improving ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...