Претраживање
Приказ резултата 21-30 од 45
Did the Iceman Know Better? Screening of the Medicinal Properties of the Birch Polypore Medicinal Mushroom, Piptoporus betulinus (Higher Basidiomycetes)
(Begell House Inc, Danbury, 2015)
The birch polypore Piptoporus betulinus was among two mushrooms that were found in the Iceman's bag. Recent studies indicated that P. betulinus was probably used as a religious and medicinal item. In order to examine the ...
Synthesis and characterization of interpenetrating polymer network based on sodium alginate and methacrylic acid and potential application for immobilization of TiO2 nanoparticles
(Wiley, Hoboken, 2015)
An interpenetrating polymer network (IPN) based on the sodium alginate (A) and partially neutralized poly(methacrylic acid) (MAA) was prepared by free radical polymerization followed by additional cross-linking of sodium ...
Influence of annealing temperature on the baking response and corrosion properties of an Al-4.6 wt% Mg alloy with 0.54 wt% Cu
(Elsevier Science Sa, Lausanne, 2015)
The effect of different thermo-mechanical processing parameters on the baking response, and intergranular corrosion (IGC) resistance of an Al-4.6 wt% Mg-0.54 wt% Cu alloy was investigated. It has been shown that the high ...
Trends in Encapsulation Technologies for Delivery of Food Bioactive Compounds
(Springer, New York, 2015)
The food industry expects increasingly complex properties (such as delayed release, stability, thermal protection, and suitable sensorial profile) from food ingredients, which often would not be able to be achieved without ...
The enhanced removal of cationic dyes in binary system using novel copolymers with two kinds of acidic groups
(Elsevier Science Bv, Amsterdam, 2015)
In this study novel copolymer hydrogels based on methacrylic acid (MAA) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) were synthesized by free-radical aqueous copolymerization and characterized. Derived P(MAA-co-AMPS) ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Cryopreservation of Serbian autochthonous Prunus spp. by droplet-vitrification
(Springer, New York, 2015)
In vitro shoot tips of Serbian autochthonous plums 'Sitnica' (Prunus domestica L.) and 'Crvena Ranka' (Prunus insititia L.) were tested for recovery after cryopreservation using the droplet-vitrification technique. After ...
Modelling current efficiency in an electrochemical hypochlorite reactor
(Elsevier, Amsterdam, 2015)
A mathematical model was set up for anodic, cathodic and overall current efficiencies of an electrochemical cell for hypochlorite production acting as an ideal stirred reactor. A 0.06-0.20 mol dm(-3) NaClO hypochlorite ...
Dynamic Mechanical and Impact Properties of Composites Reinforced with Carbon Nanotubes
(Korean Fiber Soc, Seoul, 2015)
This study presents dynamic mechanical and impact properties of the new form of hybrid thermoplastic composites. The six composites of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were impregnated with 10 ...