Претраживање
Приказ резултата 21-30 од 37
Micromechanical analysis of fatigue and crack growth in carbon-fiber epoxy composites based on mechanical testing
(Savez hemijskih inženjera, Beograd, 2020)
The paper presents static and dynamic tests of carbon/epoxy composite materials with fiber orientation at 0 degrees/90 degrees and +/- 45 degrees. The main tensile properties were determined as a basis for subsequent dynamic ...
Leaching of metastannic acid from e-waste by-products
(Springer, New York, 2020)
Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and ...
Adsorption performances and antimicrobial activity of the nanosilver modified montmorillonite clay
(Desalination Publ, Hopkinton, 2020)
The synthesis and adsorption potential of Cy-npAg, obtained by modification of raw montmorillonite clay (raw-Cy) with silver nanoparticle (npAg), was studied in this work. Optimization procedure, with respect to time, ...
Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution
(Desalination Publ, Hopkinton, 2020)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for ...
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Polymer composite films and nanofibers doped with core-shell quantum dots
(Natl Inst Optoelectronics, Bucharest-Magurele, 2020)
Processing and characterization of polymer nanocomposites based on poly(methyl methacrylate) (PMMA) matrix with embedded core-shell CdSe/ZnS quantum dots were investigated. Nanocomposites were obtained via solution casting ...
Poly(methacrylic acid) hydrogels crosslinked by poly(ethylene glycol) diacrylate as pH-responsive systems for drug delivery applications / Hidrogelovi na bazi poli(metakrilne kiseline) umreženi korišćenjem poli(etilen-glikol) diakrilata, kao pH-osetljivi nosači za kontrolisano otpuštanje lekova
(Savez hemijskih inženjera Srbije, 2023)
Hydrogels are attractive materials for drug delivery applications due to biocompatible, porous structure with the possibility to load and deliver drugs in a controllable manner. In this paper, poly(methacrylic acid) (PMAA) ...
Preparation and properties of hydrogen peroxide oxidized starch for industrial use
(Savez hemijskih inženjera, Beograd, 2020)
Oxidized starch, an additive used in paper manufacturing and products for construction industry, is usually produced using harmful oxidant, such as hypochlorites or periodates. In this study, a simple and efficient ...
Zinc oxide nanoparticles prepared by thermal decomposition of zinc benzenepolycarboxylato precursors: Photoluminescent, photocatalytic and antimicrobial properties / Наночестични прахови цинк-оксида добијени термичком деградацијом цинк-бензенполикарбоксилато прекурсора: фотолуминесцентна, фотокаталитичка и антимикробна својства
(Serbian Chemical Society, 2020)
Zinc oxide (ZnO) nanoparticles were obtained by thermal decomposition of one-dimensional zinc-benzenepolycarboxylato complexes as single-source precursors at 450 °C in an air atmosphere. The mechanism and kinetics of thermal ...
Structurally and surface-modified alumina particles as a reinforcement in polyester-based composites with an improved toughness
(Springer, New York, 2020)
Commercial gamma - Al2O3 particles, Al2O3 n, and synthesized Al2O3 doped with iron oxide (Al2O3 Fe) were used as reinforcements to enhance the toughness of an unsaturated polyester resin (UPR). Alumina modification with ...