Претраживање
Приказ резултата 61-70 од 482
Investigation of electrohydrodynamic calculations / Ispitivanje elektrohidrodinamičkih proračuna
(Savez hemijskih inženjera Srbije, 2022)
A perfect dielectric model was incorporated into the OpenFOAM® software and used for investigation and, possibly, improvements of electrohydrodynamic calculations. Two different sets of numerical simulations were analyzed, ...
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...
Experimental Determination of the Critical Value of the J-Integral that Refers to the HSLA Steel Welded Joint
(Strojarski Facultet, 2023)
Fracture mechanics, as a scientific discipline dealing with the study of cracks in welded structures, has defined parameters and introduced new test methods in order to better determine the tendency to crack growth, critical ...
The influence of thermodynamic parameters on alkaline activator of geopolymers and structure of geopolymers
(Macedonian Journal of Chemistry and Chemical Engineering, 2021)
Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 °C for the process of geopolymerization. ...
Unveiling a Recycling-Sourced Mineral-Biocellulose Fibre Composite for Use in Combustion-Generated NOx Mitigation Forming Plant Nutrient: Meeting Sustainability Development Goals in the Circular Economy
(MDPI, Basel, 2020)
Featured Application Surface flow filter for sorption of NOx in city/industrial pollution and conversion into a plant nutrient. Abstract NOx is unavoidably emitted during combustion in air at high temperature and/or pressure, ...
Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles / Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2020)
Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental ...
Application of the Integrated Supercritical Fluid Extraction–Impregnation Process (SFE-SSI) for Development of Materials with Antiviral Properties
(MDPI, 2022)
The integrated supercritical fluid extraction–impregnation process (SFE-SSI) was performed to fabricate material with antiviral properties against the herpes simplex virus (HSV). Cotton gauze and starch/chitosan polymer ...
Analysis of kinetics of poorly water-soluble drug release from hydrogels based on poly(methacrylic acid) and casein with different crosslinker amount
(University of Szeged, H-6720 Szeged, Dugonics tér 13, Hungary, 2021)
Nowadays, humanity are faced with many challenges which affect health of people all around
the globe (such as climate change, new diseases and/or already present ones for which cure has
not been found yet – cancer). The ...
An Experimental Study of Mechanical Properties and Heat Transfer of Acrylic Composites with Structural and Surface Modified Al2O3 Particles
(International Institute for the Science of Sintering (IISS), 2020)
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat ...
CONTROLLED RELEASE OF CAFFEINE FROM THREE DIMENSIONAL NETWORKS BASED ON POLY(METACRYLIC ACID) AND CASEIN - ANALYSIS OF THE EFFECT OF CAFFEINE CONCENTRATION ON RELEASE PROCESS
(Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za procesnu tehniku, 2022)
Everyday demands for safer and more efficient therapy for many diseases, especially serious ones such as various types of cancer, put various challenges in front of modern science. One of them lies in the fact that numerous ...