Претраживање
Приказ резултата 61-70 од 348
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
A Computational Model for Drug Release from PLGA Implant
(MDPI, Basel, 2018)
Due to the relative ease of producing nanofibers with a core-shell structure, emulsion electrospinning has been investigated intensively in making nanofibrous drug delivery systems for controlled and sustained release. ...
A comparative analysis of the selected properties of protective filtering masks / Uporedna analiza odabranih karakteristika zaštitnih maski filtrirajućeg tipa
(Association of Chemical Engineers of Serbia, 2014)
The results of comparative experimental testing of different filtering masks are presented in this study. Some of the most important functional properties have been tested on available models of Italian, French, British, ...
Photocatalytic efficiency of titania photocatalysts in saline waters
(Srpsko hemijsko društvo, Beograd, 2014)
The photocatalytic efficiency of a recently synthesized TiO2 powder, denoted P160, for the degradation of the Dye C.I. Reactive Orange 16 in natural and artificial seawater was investigated in comparison to its efficiency ...
Hydro- and solvothermally-prepared ZnO and its catalytic effect on the photodegradation of Reactive Orange 16 dye
(Srpsko hemijsko društvo, Beograd, 2014)
In this work, zinc oxide powders were obtained by two different techniques: hydro- and solvothermal synthesis starting from Zn(NO3)(2) and Zn(CH3COO)(2), respectively. The influence of synthetic procedure on the structural, ...
Defining the ideality of the protective masks by the mathematical modeling method / Određivanje idealnosti zaštitnih maski metodom matematičkog modelovanja
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2019)
Technical contradiction occurs when the system improves one parameter, which automatically causes the deterioration of some of its other parameters. In such a situation, instead of usual acceptance of the optimization of ...
Properties of cotton yarns after oxidation of potassium permanganate in an acidic environment / Svojstva pamučne pređe posle oksidacije kalijum-permanganatom u kiseloj sredini
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The impact of nonselective cellulose oxidation (cotton fibre) by potassium permanganate in acidic environment, with or without additional treatment by sodium metabisulfite, on change of sorption (silver ions sorption), and ...
Modification of natural clinoptilolite for nitrate removal from aqueous media
(Srpsko hemijsko društvo, Beograd, 2014)
Natural zeolitic tuff from the Zlatokop mine (Vranjska Banja deposit, Serbia) was investigated as the starting material to obtain a low cost adsorbent for the removal of nitrate from aqueous media. The tuff rich in zeolite, ...