Pretraživanje
Prikaz rezultata 21-30 od 35
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Immobilization of laccase from Trametes versicolor on Lifetech (TM) supports for applications in degradation of industrial dyes / Imobilizacija lakaze producenta Trametes versicolor na Lifetech (TM) nosače u cilju primene u razgradnji industrijskih boja
(Savez hemijskih inženjera, 2020)
In this study, immobilization of laccase from Trametes versicolor on eight Lifetech (TM) supports, with different characteristics (pore size, length of the spacer arm and functional groups), was studied and optimized for ...
Simulated Body Fluids Prepared with Natural Buffers and System for Active pH Regulation
(Iranian Institute of Research and Development in Chemical Industries, 2022)
The current study focuses on creating an initial highly alkaline simulated body fluid whose pH can be decreased to a physiological range by adding CO2 (protein-free simulated body fluid) or a combination of CO2 and human ...
Zinc oxide nanoparticles prepared by thermal decomposition of zinc benzenepolycarboxylato precursors: Photoluminescent, photocatalytic and antimicrobial properties / Наночестични прахови цинк-оксида добијени термичком деградацијом цинк-бензенполикарбоксилато прекурсора: фотолуминесцентна, фотокаталитичка и антимикробна својства
(Serbian Chemical Society, 2020)
Zinc oxide (ZnO) nanoparticles were obtained by thermal decomposition of one-dimensional zinc-benzenepolycarboxylato complexes as single-source precursors at 450 °C in an air atmosphere. The mechanism and kinetics of thermal ...
Structural and surface modification of highly ordered alumina for enhanced removal of Pb2+, Cd2+ and Ni2+ from aqueous solution
(Desalination Publ, Hopkinton, 2020)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3 and FeAl(2)O(3)APTES, was used for ...
Adsorption performances and antimicrobial activity of the nanosilver modified montmorillonite clay
(Desalination Publ, Hopkinton, 2020)
The synthesis and adsorption potential of Cy-npAg, obtained by modification of raw montmorillonite clay (raw-Cy) with silver nanoparticle (npAg), was studied in this work. Optimization procedure, with respect to time, ...
Leaching of metastannic acid from e-waste by-products
(Springer, New York, 2020)
Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and ...
Validation of a novel perfusion bioreactor system in cancer research
(Savez hemijskih inženjera, Beograd, 2020)
Development of drugs is a complex, time- and cost-consuming process due to the lack of standardized and reliable characterization techniques and models. Traditionally, drug screening is based on in vitro analysis using ...
Polymer composite films and nanofibers doped with core-shell quantum dots
(Natl Inst Optoelectronics, Bucharest-Magurele, 2020)
Processing and characterization of polymer nanocomposites based on poly(methyl methacrylate) (PMMA) matrix with embedded core-shell CdSe/ZnS quantum dots were investigated. Nanocomposites were obtained via solution casting ...
High temperature materials: properties, demands and applications
(Savez hemijskih inženjera, Beograd, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...