Претраживање
Приказ резултата 21-30 од 736
Influence of periodate oxidation on sorption properties of viscose yarn
(Editura Acad Romane, Bucuresti, 2018)
Viscose yarn was submitted to oxidation using different sodium periodate concentrations for various periods of time in order to investigate the influence of oxidation on the chemical and sorption properties of the resulting ...
Hydrometallurgical process for extraction of metals from electronic waste, part II: Development of the processes for the recovery of copper from printed circuit boards (PCB)
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Rapid technological development induces increase of generation of used electric and electronic equipment waste, causing a serious threat to the environment. Waste printed circuit boards (WPCBs), as the main component of ...
TEMPO-oxidized cotton as a substrate for trypsin immobilization: impact of functional groups on proteolytic activity and stability
(Springer, Dordrecht, 2017)
Cotton fibers containing different amounts of aldehyde and carboxyl groups were prepared by varying TEMPO oxidation conditions and then employed as carriers for trypsin immobilization. Depending on the functional group ...
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Welding technology of aluminium alloys using friction stir welding / Tehnologija zavarivanja aluminijumskih legura postupkom zavarivanja trenjem alatom
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2010)
The objective of this paper is a development of welding technology of aluminium alloys by Friction Stir Welding (FSW). FSW is a very modern welding process with a great future use, primarily due to a variety of possible ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
The effects of the synthesis parameters on the xerogels structures and on the swelling parameters of the poly(methacrylic acid) hydrogels
(Elsevier Science Sa, Lausanne, 2010)
Poly(methacrylic acid) hydrogels were synthesized. The effects of the synthesis parameters: the neutralization degree of methacrylic acid and the concentrations of monomer, crosslinker and initiator on the xerogels structural ...
Simultaneity analysis in a wireless sensor network
(Polska Akad Nauk, Polish Acad Sciences, Warszawa, 2015)
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with ...