Претраживање
Приказ резултата 31-40 од 227
The impact of manufacturing process on the content of hard triglycerides, hardness and thermal properties of milk chocolate
(Savez hemijskih inženjera, Beograd, 2012)
The rheological and physical properties of the chocolate mass depend on the ingredient composition as well as the manufacturing process. For the purpose of this work, a milk chocolate mass of identical composition and raw ...
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(epsilon-caprolactone) beads and foams
(Srpsko hemijsko društvo, Beograd, 2018)
The influence of the size and surface modification of TIO2 nanoparticles on the rheological properties of alkyd resin / Uticaj veličine nanočestica TIO2 i njihove površinske modifikacije na reološka svojstva alkidne smole
(Association of Chemical Engineers of Serbia, 2013)
Spherical TiO2 particles of different size were dispersed in alkyd resin based on soybean oil. Four samples of TiO2 particles were used, three commercial and one obtained by acid catalyzed hydrolysis of titanium ...
Diffusion of drugs in hydrogels based on (meth)acrylates, poly(alkylene glycol) (meth)acrylates and itaconic acid / Difuzija lekova u hidrogelovima na bazi (met)akrilata, poli(alkilenglikol)-(met)akrilata i itakonske kiseline
(Association of Chemical Engineers of Serbia, 2012)
The aim of this paper is to propose equations for the diffusion of drugs for investigated drug/hydrogel systems using the parameters affecting the transport of drug through poly- (2-hydroxyethylmethacrylate/itaconic acid) ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNa(2)HPO(4) + (1-y)K2HPO4}(aq) System at T=298.15 K
(Springer/Plenum Publishers, New York, 2016)
Isopiestic measurements have been made for aqueous mixtures of Na2HPO4 and K2HPO4 at T = (298.15 +/- 0.01) K, at Na2HPO4 ionic strength fractions y = (0.2023, 0.4060, 0.6027, 0.8007, and 1), using KCl(aq) as the reference ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
The effect of co-60 gamma irradiation on coal fly-ash geopolymer paste setting time
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2020)
Cementation is the baseline technology for conditioning of low to intermediate level radioactive waste. Geopolymers, a class of alkali activated binders, are a promising new material for radioactive waste treatment. Coal ...
Thermodynamics of mixed and pure aqueous solutions of K2HPO4 at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2015)
Experimental results on isopiestic measurements for three ternary aqueous solutions of K2HPO4 with KCl, KBr, and KNO3 at T = 298.15 K were modeled with the Clegg-Pitzer-Brimblecombe equation based on mole-fraction-composition ...
Immobilization of maltase from Saccharomyces cerevisiae on thiosulfonate supports
(Srpsko hemijsko društvo, Beograd, 2016)
In this study, two commercial supports (Eupergit (R) C and Purolite (R) A109) were chemically modified in order to introduce thiosulfonate groups, which could subsequently exclusively react with the cysteine residues on ...