Pretraživanje
Prikaz rezultata 31-40 od 188
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(ε-caprolactone) beads and foams
(Serbian Chemical Society, Belgrade, 2018)
This study discusses the possibility of immobilization of colloidal TiO2 nanoparticles (NPs) onto poly(ε-caprolactone) (PCL) beads and foams that could be utilized for the removal of textile dyes from water by photodegradation. ...
Modification of natural clinoptilolite and ZSM-5 with different oxides and a study of the obtained products in lignin pyrolysis
(Srpsko hemijsko društvo, Beograd, 2015)
In this work, different metal oxides (MO) supported on two types of zeolites: 1) natural clinoptilolite (NZ) and 2) synthetic zeolite, ZSM-5 were prepared and tested as catalysts in the fast pyrolysis of hardwood lignin. ...
Adsorption kinetics of polyethersulfone membrane-supported hydrogels
(Desalination Publ, Hopkinton, 2018)
This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone ...
Ultrasound-assisted extraction of polyphenols from Thymus serpyllum and its antioxidant activity
(Savez hemijskih inženjera, Beograd, 2016)
The present study was designed to establish and optimize a method for extracting natural bioactive compounds from Thymus serpyllum which possess antioxidant, antimicrobial, antispasmodic and stimulant properties. ...
Influence of hematite nanorods on the mechanical properties of epoxy resin
(Srpsko hemijsko društvo, Beograd, 2017)
The mechanical properties of nanocomposites obtained by incorporation of fairly uniform hematite nanorods (alpha-Fe2O3 NRs) into epoxy resin were studied as a function of the content of the inorganic phase. A thorough ...
Structural, Morphological and Electrical Properties of Alumina/YAG Composites as Solid Electrolyte for IT - SOFC
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Alumina/YAG composites (AYX_t) with high relative density (99.2 %TD) were successfully obtained by mixing commercial alumina powder with different volume fractions of yttrium aluminium garnet (Y3Al5O12-YAG; 7, 14, 21 and ...
Visible light absorption of TiO2 nanoparticles surface-modified with vitamin B-6: A comparative experimental and DFT study
(Srpsko hemijsko društvo, Beograd, 2018)
Surface modification of titanium dioxide nanoparticles (TiO2 NPs) with the biologically active molecule pyridoxine hydrochloride (vitamin B-6) was found to alter the optical properties. Microstructural characterization ...
Influence of surface modification to mechanical and thermal properties of nanomodified acrylic dental resin
(Inst Materials Physics, Bucharest, 2018)
This paper investigated the processing and characterization of dental nanocomposites based on poly(methyl methacrylate) (PMMA) matrix reinforced with zirconium dioxide (ZrO2) nanoparticles were prepared by in-situ free ...
Degradation of nicosulfuron using fenton and fenton-like reactions
(Savez hemijskih inženjera, Beograd, 2018)
Nicosulfuron, a sulfonylurea herbicide, was subjected to different Fenton reactions at pH of a nicosulfuron aqueous solution (pH 5). Usually, the optimal pH for the Fenton reaction is between 3 and 4, but the addition of ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...