Претраживање
Приказ резултата 1-10 од 42
The effect of deposition process exchange current density on the thin metal film formation on inert substrate
(Serbian Chemical Society, Belgrade, 1997)
The initial stage of thin surface metal film formation on inert substrate is considered. The simultaneous action of both active centers and nucleation exclusion zones was taken into consideration when discussing the ...
Blends of thermoplastic starch and some thermoplastic polymers
(Serbian Chemical Society, Belgrade, 1998)
Thermoplastic starch (TPS) was blended in a twin screw mixer with 5 and 10 mass % of poly(ethylene-co-acrylic acid) (EAA), poly(ethylene-co-vinyl acetate) (EVA) or cellulose acetate (CA) in order to improve the TPS properties. ...
Modeling of drawing thin glass sheet from a preform
(Serbian Chemical Society, Belgrade, 1998)
A one-dimensional model of thin glass sheet drawing has been developed. This model includes momentum, heat and mass balance equations. The density, viscosity and specific heat of the glass were calculated as functions of ...
Reactivity of beta-aroylacrylic acids with diazodiphenylmethane
(Serbian Chemical Society, Belgrade, 1998)
The rate constants for 10 trans-substituted beta-aroylacrylic acids in their reaction with diazodiphenylmethane (DDM) were determined in ethanol at 30 degrees C. The intention was to study the transmission of electronic ...
Cubic equation of state models for the liquid excess heat capacity calculations. I. Mixing rules
(Serbian Chemical Society, Belgrade, 1998)
Binary liquid excess heat capacities, c(p)(E), were calculated by the PRSV EOS coupled with the van der Waals one fluid (vdW), the modified van der Waals one fluid (Schwartzentruber-Renon)(SR) and the Orbey-Sandler ...
Cubic equation of state models for liquid excess heat capacity calculations. II. Applicability of the PRSV-SR and PRSV-HVOS models to complex binary mixtures
(Serbian Chemical Society, Belgrade, 1998)
Binary liquid excess heat capacities C-p(E) for various kinds of complex binary systems measured by Conti and coworkers are well represented by the PRSV EOS modified van der Waals one fluid mixing rule proposed by ...
Fluid dynamic studies of a three-phase fluidized bed
(Serbian Chemical Society, Belgrade, 1996)
Three phase flow and mixing in the liquid phase were studied for a draft tube fluidized bed (DTFB) operating in a circulating regime. The DTFB was considered as a system consisting of five interconnected compartiments: the ...
Mass spectrometric study of glassy carbon surface stability
(Serbian Chemical Society, Belgrade, 1996)
The combinaton of temperature-programmed desorption (TPD) and quadrupole mass spectrometry was used to investigate glassy carbon surface stability. TPD experiments provide valuable information about the nature and the ...
The acid resistance and corrosion stability of polyester coatings on phosphatized steel
(Serbian Chemical Society, Belgrade, 1998)
Protective polyester coatings on phosphatized steel were obtained with different combinations of diols (2-butyl-2-ethyl-1,3-propanediol or 2,2-dimethyl-1,3-propanediol), organic acids (1,3-cyclohexanedicarboxylic acid, ...
An investigation of the synthesis of poly(L-lactide) as a biodegradable polymer for orthopaedic applications
(Serbian Chemical Society, Belgrade, 1996)
The investigation is based upon recent research in the area of the synthesis of biodegradable poly(L-lactide) (PLLA) for biomedical applications using stannous octoate (SnOct) as an initiator. The objective was to investigate ...