Pretraživanje
Prikaz rezultata 1221-1230 od 1230
High-temperature and high-pressure (p, rho, T) measurements and derived thermodynamic properties of 1-octyl-3-methylimidazolium hexafluorophosphate
(Srpsko hemijsko društvo, Beograd, 2020)
Densities of ionic liquid (IL) 1-octyl-3-methylimidazolium hexafluorophosphate [OMIM][PF6] at high temperatures and high pressures were measured. The measurements were made along 10 isotherms over a temperature range T = ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Supercritical carbon dioxide hops extracts with antimicrobial properties
(De Gruyter Open Ltd, Warsaw, 2015)
Extracts obtained from hops (Humulus lupulus L., Cannabaceae) by supercritical fluid extraction (SFE), SFE followed by isomerization, as well as by conventional technique, were investigated for their chemical composition ...
Seam pipes for process industry - Fracture analysis by using ring-shaped specimens
(Savez hemijskih inženjera, Beograd, 2018)
Pipelines are commonly used in process industry for transport of fluids, as well as granular solids, due to their numerous advantages in comparison to other transportation means. Pipe integrity is essential for a reliable ...
Leaching of metastannic acid from e-waste by-products
(Springer, New York, 2020)
Anode slime and tin precipitate as by-products of the electrorefining (ER) of non-standard anodes obtained after experimental smelting of waste electric and electronic equipment (e-waste), in addition to the base and ...
Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization / Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija
(Serbian Chemical Society, 2012)
A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Adsorption performances and antimicrobial activity of the nanosilver modified montmorillonite clay
(Desalination Publ, Hopkinton, 2020)
The synthesis and adsorption potential of Cy-npAg, obtained by modification of raw montmorillonite clay (raw-Cy) with silver nanoparticle (npAg), was studied in this work. Optimization procedure, with respect to time, ...
An analysis of impact testing of high strength low-alloy steels used in ship construction
(Brodogradnja, 2021)
Brittle damages have been examined widely since welding became common practice when it comes to carrying out robust structures. Welded structure of the ship hull has to be continuous. Brittle damages that occur on hull ...
The influence of thermodynamic parameters on alkaline activators of geopolymers and the structure of geopolymers
(Macedonian Journal of Chemistry and Chemical Engineering, 2021)
Thermodynamic parameters (densities, viscosities, speed of sound, and refractive index) of four series of alkaline activators were determined over the temperature range from 15 to 60 degrees C for the process of ...