Search
Now showing items 21-30 of 1021
Supercritical carbon dioxide extraction of essential oils and mathematical modelling on the micro-scale - General model
(CHISA 2006 - 17th International Congress of Chemical and Process Engineering, 2006)
General model for the supercritical carbon dioxide extraction of essential oils on the secretory structure scale (micro-scale) is presented in this study. The model containes Source and Transfer term which describes mass ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
Decolorization of four AZO dyes using water falling film DBD reactor
(12th International Symposium on High Pressure Low Temperature Plasma Chemistry, HAKONE 2010, 2010)
In this paper we present experimental results of the decolorization of four commercial reactive azo dyes using falling film DBD reactor. In this reactor water forms a falling film which is in direct contact with plasma. ...
Frequency response analysis as a tool for fast evaluation of periodic operations. Case study: A heterogeneous catalytic reacator
(2nd European Process Intensification Conference (EPIC 2009), Venice, Italy, 2009)
One way to achieve process intensification is to operate the process in a periodic way, in order to obtain better average performance compared to the optimal steady-state operation. The source of the possible improvement ...
Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
(Nice : International Society of Electrochemistry, 2010)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 ...
Improved electrolyte for zinc-polyaniline batteries
(2010)
Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010
Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte
(Nice : International Society of Electrochemistry, 2010)
Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization ...
Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize
(Nice : International Society of Electrochemistry, 2010)
Polyaniline (PANI) enzyme electrode was formed by immobilization of Glucose oxidase (GOx) via glutaraldehyde into electrochemicaly polymerized PANI on graphite electrode. Electrochemical polymerization of PANI on graphite ...
Electrochemical characterization of polyaniline electrode for use in electrochemical power sources
(Nice : International Society of Electrochemistry, 2010)
Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. ...