Pretraživanje
Prikaz rezultata 21-30 od 209
Effect of annealing temperature on the formability of Al-Mg4.5-Cu0.5 alloy sheets
(Elsevier Science Sa, Lausanne, 2006)
Formability of Al-Mg4.5-Cu0.5 alloy sheets was tested after annealing at different temperatures (220-520 degrees C) and water quenching. The formability (normalized limiting dome heights, LDH/R) showed only a small variation ...
Effect of low-temperature plasma and chitosan treatment on wool dyeing with acid red 27
(John Wiley & Sons Inc, Hoboken, 2005)
This study examines in detail the influence of low-temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink-resistance measurements. ...
The combined low-temperature, plasma/enzyme wool shrink-resist treatment
(Amer Assoc Textile Chemists Colorists-Aatcc, Res Triangle Pk, 2003)
To successfully achieve shrink resistance, an enzymatic treatment was applied to knitted fabrics previously treated with a radio-frequency low-temperature plasma. Shrink resistance was attained at the machine-washable level ...
Synthesis of functionally graded bioactive glass-apatite multistructures on Ti substrates by pulsed laser deposition
(Elsevier Science Bv, Amsterdam, 2007)
Functionally graded glass-apatite multistructures were synthesized by pulsed laser deposition on Ti substrates. We used sintered targets of hydroxyapatite Ca-10(PO4)(6)(OH)(2), or bioglasses in the system SiO2-Na2O-K2O-C ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Ca-alginate hydrogel mechanical transformations - The influence on yeast cell growth dynamics
(Elsevier, Amsterdam, 2007)
A mathematical model was formulated to describe yeast cell growth within the Ca-alginate microbead during air-lift bioreactor cultivation. Model development was based on experimentally obtained data for the intra-bead cell ...
Influence of the electrode parameters on pulse shape characteristic of gas-filled surge arresters at small pressure and inter-electrode gap values
(IEEE-Inst Electrical Electronics Engineers Inc, Piscataway, 2005)
The aim of this paper is to present the influence of electrode system parameters on electrical breakdown of gas (electrode effect) with the purpose to improve the gas-filled surge arresters (GFSAs) protective characteristics ...
The effects of plasticizers on the properties of poly(vinyl chloride) foams
(Journal of Vinyl and Additive Technology, 2002)
The effects of plasticizers on poly(vinyl chloride) (PVC) plastisol mixtures were investigated. The investigations were carried out by determining the density of the PVC foam obtained by gelling the plastisol, as well as ...
Estimation of elastic properties of a particulate polymer composite using a face-centered cubic FE model
(Elsevier, Amsterdam, 2004)
A three-dimensional (31)) finite element (FE) unit cell model is applied to studies on the elastic properties of ceramic spherical particle-polymer composite. In this model, hydroxyapatite particles (HAp) are assumed to ...
Study of the kinetics and the influence of Bi-irr, on formic acid oxidation at Pt2RU3/C
(Pergamon-Elsevier Science Ltd, Oxford, 2007)
Electrochemical oxidation of HCOOH in H2SO4 and HCIO4 solutions was examined on thin film Pt2RU3/C electrode. XRD pattern revealed that Pt2RU3 alloy consisted of the solid solution of Ru in Pt and the small amount of Ru ...