Pretraživanje
Prikaz rezultata 11-19 od 19
Electrochemical deposition and corrosion stability of Zn-Co alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Co legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
The influence of the type of the deposition solution, deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Co alloys was examined. Alloys were deposited ...
Electrochemical deposition and characterization of Zn-Fe alloy coatings / Elektrohemijsko dobijanje i karakterizacija prevlaka legura cink-gvožđe
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The influence of the deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Fe alloys was examined. Alloys were deposited on a rotating disc electrode and ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy coating / Uticaj pripreme površine pocinkovanog čelika na adheziju epoksidne prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
The influence of hot-dip galvanized steel surface pretreatment on the adhesion of epoxy cataphoretic coating was investigated. Several passive films were formed on hot-dip galvanized steel (phosphate, chromate and oxide). ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel / Elektrohemijska sinteza i koroziono ponašanje tankih filmova polianilina na mekom čeliku
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The electrochemical synthesis of polyaniline (PANI) on mild steel from the sodium-benzoate solutions has been investigated. It has been concluded that thin, highly adherent, polyaniline films could be obtained by anodic ...
Formation of approximate differential equations for electrical and molar conductivity determinations of sulfuric acid aqueous solution / Formiranje aproksimacionih diferencijalnih jednačina za određivanje električne i molarne provodljivosti vodenog rastvora sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
In this paper formation of linear differential equations for approximate determination of electrical and molar conductivity of sulfuric-acid solutions, has been give.
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Elektrohemijska oksidacija jodid-jona u vodenim rastvorima
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
The electrochemical reaction of iodine ions oxidation was investigated in order to estimate the optimal conditions for electrolysis. The anodic polarization curves were determined in solutions of different KI concentration: ...
Kinetic of corrosion reactions in acid and neutral solutions on electrochemically deposited Ni-W alloys / Kinetika korozionih reakcija u kiselim i neutralnim rastvorima na elektrohemijski taloženim legurama Ni-W
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
Ni-W alloys were electrochemically deposited from an ammonia-citrate electrolyte on rotating disc electrode with a gold disc, by direct and pulsating current. The corrosion potential and kinetics of cathodic and anodic ...