Search
Now showing items 31-40 of 58
INFLUENCE OF ELECTRODEPOSITION REGIME AND Sn:Pd RATIOS IN Sn-Pd ELECTROCATALYSTS ON ETHANOL OXIDATION REACTION / ВЛИЈАНИЕ НА РЕЖИМОТ НА ЕЛЕКТРОДЕПОЗИЦИЈАТА И НА ОДНОСИТЕ НА Sn:Pd ВО Sn-Pd-ЕЛЕКТРОКАТАЛИЗАТОРИТЕ ВРЗ ОКСИДАЦИЈАТА НА ЕТАНОЛОТ
(Society of Chemists and Technologists of Macedonia, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Disparate soil textures as a native medium for As(V) and Pb(II) separation from aqueous systems
(Desalination Publications, 2022)
This study investigated the use of different natural raw soil materials as low-cost adsorbents for
the removal to remove As(V) and Pb(II) from aqueous systems. It deals with the effect of different soil textures, sandy ...
Mass transfer in inverse fluidized beds / Prenos mase u inverzno fluidizovanom sloju
(Serbian Chemical Society, 2023)
In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and ...
INFLUENCE OF GASEOUS LASER IN CONTINUOUS-WAVE AND PULSE REGIMES ON BIOMATERIAL CHARACTERISTICS / УТИЦАЈ ГАСНИХ ЛАСЕРА У КОНТИНУАЛНОМ И ИМПУЛСНОМ РЕЖИМУ НА КАРАКТЕРИСТИКЕ БИОМАТЕРИЈАЛА
(Vinca Inst Nuclear Sci, 2023)
Aromatic plants and laser beam wavelength in the red range of visible spectra (623.8 nm), most commonly used for treating plant species, were selected. As there is not much information in the references, it is necessary ...
Thermo-mechanical analysis of linear welding stage in friction stir welding Influence of Welding Parameters
(VINČA Institute of Nuclear Sciences, 2022)
The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Dispersive liquid–liquid microextraction and Monte Carlo simulation of margin of safety for octocrylene, EHMC, 2ES, and homosalate in sunscreens
(John Wiley and Sons Ltd., 2023)
Dispersive liquid–liquid microextraction (DLLME) using a floating organic drop has been optimized and used for the sample preparation of four commonly used ultraviolet filter (UVF) substances in sunscreens. Plackett–Burman ...
Adsorptive pretreatment of waste cooking oil using quicklime for fatty acid methyl esters synthesis
(Association of the Chemical Engineers of Serbia, 2023)
Synthesis of biodiesel from various plant oils is realized by the transesterification of triglycerides with methanol or by a reaction usually defined as methanolysis. The usage of low-quality oils, such as waste cooking ...
Forced Periodic Operation of Methanol Synthesis in an Isothermal Gradientless Reactor
(John Wiley and Sons Inc, 2022)
Methanol synthesis from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts in an isothermal gradientless reactor is described. In a theoretical study, the potential of forced periodic operation (FPO) for improving ...
Assessment of the burden of disease due to PM2.5 air pollution for the Belgrade district
(VINČA Institute of Nuclear Sciences, 2023)
The health effects attributed to exposure to ambient PM2.5 concentrations
above 10 μg/m3
by using the AirQ+ modeling software were assessed. The
hourly concentrations of PM2.5 were collected from 13 air pollution
monitoring ...
Green corrosion inhibitors of steel based on peptides and their constituents: a combination of experimental and computational approach
(Springer Science and Business Media Deutschland GmbH, 2023)
In this work, six groups of non-toxic compounds were tested as inhibitors for mild steel in 1 M HCl solution: glycine (Gly), glutamic acid (Glu), cysteine (Cys), a mixture of three amino acids glycine, glutamic acid, and ...