Search
Now showing items 21-30 of 37
Improvement of mechanical properties and antibacterial activity of crosslinked electrospun chitosan/poly (ethylene oxide) nanofibers
(Elsevier Sci Ltd, Oxford, 2017)
In this study conditions for green crosslinking with citric acid of chitosan/PEO (polyethylene oxide) nanofibers were evaluated. The thermal in situ crosslinking enabled penetration of crosslinking agent into the matrix ...
Preparation, characterization and mechanical properties of Bi12SiO20-PMMA composite films
(Elsevier Science Sa, Lausanne, 2014)
This paper investigates processing and characterization of polymer composite material PMMA-Bi12SiO20 (BSO). Thin films of pure PMMA and composites with 0.5 and 1.0 wt% of Bi12SiO20 powder were made using solution casting ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Biocomposite membranes of highly methylated pectin and mesoporous silica SBA-15
(Elsevier Ltd., 2014)
Manufacturing of synthetic composites consumes huge energy and their disposal at the end of the life cycle is very difficult since there is virtually no recycling option. Therefore, biocomposite materials have recently ...
Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
(Elsevier Science Sa, Lausanne, 2018)
effect of initial microstructure on the mechanical properties and fracture mode of the Ti-6Al-4V ELI alloy subjected to the high-pressure torsion (HPT) processing at room temperature and 500 degrees C was investigated. In ...
Effects of dispersion and particle-matrix interactions on mechanical and thermal properties of hnt/epoxy nanocomposite materials
(International Conference on New Technologies, Development and Application, NT 2020, 2021)
Halloysite nanotubes (HNTs), naturally occurring as aluminosilicate nanoclay mineral, have recently emerged as a possible nanomaterial for countless applications due to their specific chemical structure, tubular shape, ...
Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method
(Elsevier Sci Ltd, Oxford, 2016)
The chemical synthesis of nickel manganite powder was performed by a complex polymerization method (CPM). The obtained fine nanoscaled powders were uniaxially pressed and sintered at different temperatures: 1000-1200 degrees ...
Effect of mechanical activation on carbothermal synthesis and densification of ZrC
(Elsevier Ltd, 2023)
Zirconium carbide ceramics were prepared by carbothermal reduction of ZrO2 and C that were mixed by high-energy ball milling. Powders were milled for times from 0 to 120 min in air. As milling time increased, the surface ...
Sr,Mg co-doping of calcium hydroxyapatite: Hydrothermal synthesis, processing, characterization and possible application as dentin substitutes
(Ceramics International, 2022)
The aim of this study was to investigate the influence of binary Sr, Mg ion-doping compared to the single-ion doping effects on the phase composition and morphology of hydrothermally obtained calcium hydroxyapatite (HAP) ...
Solvent effects on structural changes in self-healing epoxy composites
(Elsevier Science Sa, Lausanne, 2020)
Nowadays, there is a very high importance of composite research and variety of their applications in the modern world. In that sense, we researched hollow glass capillaries filled with dissolved Grubbs catalyst (GC) and ...