Претраживање
Приказ резултата 31-39 од 39
Air Cooler for Crystal Growth in a Laboratory Tube Furnace
(Pleiades Publishing, 2022)
A new air cooler design (“specific two-level crystallization incubator”) with a specific arrangement of laboratory vessels by levels and double-branch air conductors at the ends and a series of movable cold thresholds ...
To Professor Petar Pfendt, In calidum, et plurium retributivus memoriae: FTIR-ATR analysis of post stamps of the Principality of Serbia issued in 1866 and 1868 and their forgeries
(Journal of the Serbian Chemical Society, 2022)
In order to further define the potential use of FTIR-ATR spectroscopy, as a non-destructive and reliable technique, for the analysis of the characteristics of post stamps, certified originals of the Principality of Serbia ...
Forced Periodic Operation of Methanol Synthesis in an Isothermal Gradientless Reactor
(John Wiley and Sons Inc, 2022)
Methanol synthesis from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts in an isothermal gradientless reactor is described. In a theoretical study, the potential of forced periodic operation (FPO) for improving ...
Disparate soil textures as a native medium for As(V) and Pb(II) separation from aqueous systems
(Desalination Publications, 2022)
This study investigated the use of different natural raw soil materials as low-cost adsorbents for
the removal to remove As(V) and Pb(II) from aqueous systems. It deals with the effect of different soil textures, sandy ...
Structural Design of Safety Steel Device of Railway Vehicles Through Analytical and Experimental Investigations
(Budapest Tech Polytechnical Institution, 2022)
The subject of this paper is the structural design of a safety steel device that is located between the standard wagon buffer and the collision energy absorber. The safety steel device is a sacrifical part able to withstand ...
Thermo-mechanical analysis of linear welding stage in friction stir welding Influence of Welding Parameters
(VINČA Institute of Nuclear Sciences, 2022)
The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Influence of boron doping on characteristics of glucose-based hydrothermal carbons
(Journal of the Serbian Chemical Society, 2022)
In this study, the influence of boron doping on structural and surface properties of carbon material synthesized by a hydrothermal method was investigated, and the obtained results were compared with the previously published ...
GEOSPATIAL MAPPING OF ECOLOGICAL RISK FROM POTENTIALLY TOXIC ELEMENTS IN SOIL IN THE PANNONIAN-CARPATHIAN BORDER AREA SOUTH OF THE DANUBE
(Carpathian Association of Environment and Earth Sciences, 2022)
This study collected agricultural surface soil samples from 200 sites in the district of Braničevo, located in the Carpathian Mountains – Pannonian Basin south of the Danube River (Serbia). The main objective was to determine ...
Beech sawdust based adsorbents for solid-phase extraction of pesticides and pharmaceuticals
(Serbian Chemical Society, 2022)
Carbonaceous solid-phase extraction (SPE) sorbent, efficient in isol-ation and enrichment of multiclass pesticides and pharmaceuticals from water, was synthesized starting from cheap waste beech sawdust and using KOH as ...