Претраживање
Приказ резултата 31-40 од 64
Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose / СУПЕРКАПАЦИТИВНА СВОЈСТВА УГЉЕНИЧНИХ МАТЕРИЈАЛА ДОБИЈЕНИХ ИЗ СAХАРОЗЕ И АКТИВИРАНИХ ХИДРОКСИДИМА АЛКАЛНИХ МЕТАЛА
(Serbian Chemical Society, 2022)
The influence of different hydroxides, applied to activate carbon black, on the electrochemical properties of activated carbon was investigated. The carbon material was prepared by hydrothermal treatment of sucrose and ...
Hardness and corrosion resistance of Zn−Mn/Al2 O3 composite coatings produced by electrochemical deposition
(National Institute of Science Communication and Policy Research, 2022)
The aim of this study is development and characterization of the novel Zn-Mn/Al2O3 composite coatings. The coatings were electrodeposited with constant current density on steel, from chloride solution, without any commercial ...
Forced Periodic Operation of Methanol Synthesis in an Isothermal Gradientless Reactor
(John Wiley and Sons Inc, 2022)
Methanol synthesis from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts in an isothermal gradientless reactor is described. In a theoretical study, the potential of forced periodic operation (FPO) for improving ...
Modification of Structural-Textural Properties of Sulfide Minerals at Polymetallic Concentrate Leaching with Sulfuric Acid and Hydrogen Peroxide Solutions
(Pleiades journals, 2022)
This paper examines the effects of structural-textural characteristics of sulfide minerals on their leaching from polymetallic concentrates with sulfuric acid and hydrogen peroxide solutions. The polymetallic concentrate ...
Adsorptive pretreatment of waste cooking oil using quicklime for fatty acid methyl esters synthesis
(Association of the Chemical Engineers of Serbia, 2023)
Synthesis of biodiesel from various plant oils is realized by the transesterification of triglycerides with methanol or by a reaction usually defined as methanolysis. The usage of low-quality oils, such as waste cooking ...
Thermo-mechanical analysis of linear welding stage in friction stir welding Influence of Welding Parameters
(VINČA Institute of Nuclear Sciences, 2022)
The influence of friction stir welding parameters on thermo-mechanical behavior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Cellulases: From Lignocellulosic Biomass to Improved Production
(MDPI, 2023)
Cellulases are enzymes that are attracting worldwide attention because of their ability to degrade cellulose in the lignocellulosic biomass and transform it into highly demanded bioethanol. The enzymatic hydrolysis of ...
Optimization of the extraction of antioxidants from stinging nettle leaf using response surface methodology
(Macedonian Journal of Chemistry and Chemical Engineering, 2022)
The aim of this study was to optimize the parameters for the extraction of total flavonoids from stinging nettle leaf. Comparison of the effects of different solvents on total flavonoid content showed that, regardless of ...
Selectivity of polyclonal repertoire of anti-microbial IgA and its subclasses in saliva and serum in humans
(John Wiley and Sons Inc, 2022)
Increased interest in microbiota calls for the thorough analysis of antibody reactivity to different microorganisms. As salivary IgA represents the first line of defence against microorganisms contacting mucosal surfaces, ...
Disparate soil textures as a native medium for As(V) and Pb(II) separation from aqueous systems
(Desalination Publications, 2022)
This study investigated the use of different natural raw soil materials as low-cost adsorbents for
the removal to remove As(V) and Pb(II) from aqueous systems. It deals with the effect of different soil textures, sandy ...