Pretraživanje
Prikaz rezultata 11-20 od 95
Liquid velocity in a three and two phase external loop airlift reactors / Brzina tečnosti u dvofaznim i trofaznim pneumatskim reaktorima sa spoljašnjom cirkulacijom
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2011)
In this paper, the influence of the geometry and the presence of the solid phase on the hydrodynamics of three-phase pneumatic reactor with external recirculation were theoretically and experimentally examined. Tests were ...
Synthesis and characterization of carbon materials as titanium dioxide carrier for removal of the selected organic pollutants from water / Sinteza i karakterizacija ugljeničnih materijala kao nosača titan-dioksida za uklanjanje odabranih organskih zagađujućih materijala iz vode
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
The main objective of this work was to develope appropriate preparation method in order to obtain TiO2/carbon composites with the highest efficiency in removal of organic pollutants from the water. Carbon monolith and ...
Zero waste technology of juniper berry (Juniperus communis L.) processing / Bezotpadna tehnologija prerade ploda kleke (Juniperus communis L.)
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
Essential oils are aromatic, volatile, complex mixtures of various compounds, mainly hydrocarbons (monoterpene and sesquiterpene) and oxygenated hydrocarbons. Juniper berry essential oil has wide application and high ...
Electrochemical and surface characterization of ternary alloys of the system Ag-Cu-Zn in near neutral chloride solutions. / Elektrohemijska i površinska karakterizacija trokomponentnih legura sistema Ag-Cu-Zn u blisko neutralnim hloridnim rastvorima
(Univerzitet u Beogradu, Tehnički fakultet, Bor, 2015)
Alloys of the Ag-Cu-Zn system with wide range of silver content, selected to have similar phase compositions, were the subject of the research. Metals for all examined alloys are obtained by recycling of electronic waste. ...
The synthesis of fatty acid methyl esters from waste lard by homegeneously and heterogeneously catalyzed methanolysis / Sinteza metil estara masnih kiselina otpadne svinjske masti primenom homogeno i heterogeno katalizovane metanolize
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation the methanolysis of waste lard from piglet roasting in the presence of KOH, CaO or quicklime at moderate temperatures (below the boiling point of methanol) and the molar ratio of methanol:fatty ...
Production of lactic acid and probiotic biomass on distillery stillage / Proizvodnja mlečne kiseline i probiotske biomase na destilerijskoj džibri
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Lactic acid is a significant chemical for food, cosmetic, pharmaceutical and chemical industry. Currently, Serbia imports lactic acid and utilization of distillery stillage, a waste water from bioethanol production, as a ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Micromechanical properties and thermal stability of adhesives for optical fibers based on ethylene-vinyl acetate copolymer / Mikromehanička svojstva i termička stabilnost adheziva za optička vlakna na bazi kopolimera etilena i vinil-acetata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Optical fibers are used for transfer of information when the reliable system was required, and in some situations it is necessary to transport optical fibers on the drums and to enable controlled and fast unwinding from ...
Preparation of nanocomposites based on thermoplastic polymers and influence of titanium and iron oxides nanoparticles on their properties / Dobijanje nanokompozita na bazi termoplastičnih polimera i uticaj nanočestica oksida titana i gvožđa na njihova svojstva
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
The synthesis of polymer nanocomposites by in situ polymerization of monomers in the presence of filler particles is presented in this dissertation. Nanoparticles of TiO2 and α-Fe2O3 were used as fillers. Polymer nanocomposites ...
The Study of the Enzymatic Synthesis Mechanism of 4,6-Disubstituted 3-cyano-2-pyridones / Proučavanje mehanizma enzimske sinteze 4,6-disupstituisanih-3-cijano-2-piridona
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
In this thesis, the mechanism of lipase catalyzed synthesis of 4,6-disubstituted-3-cyano-2-pyridones was studied, and for that purpose the simplest molecule, 4,6-dimethyl-3-cyano-2-pyridone, and vitamin B6 precursor, ...